Gainesville Industrial Electric Co. - WFR/WR Series Severe Duty, NEMA Premium, Three Phase, TEFC, Stainless Steel, Footed C-Face (F1) Washdown Motors

AEGP, NEMA Premium, TEFC

Request Information

Unit of Measure

Items	WFR0/52C WFR Series 1/2 Horsepower (hp), 3600 Revolutions Per Minute (rpm), and 56C Frame Three Phase NEMA Premium Footed C-Face F1 TEFC Stainless Steel Washdown Severe Duty Motor	WFR0/54C WFR Series 1/2 Horsepower (hp), 1800 Revolutions Per Minute (rpm), and 56C Frame Three Phase NEMA Premium Footed C-Face F1 TEFC Stainless Steel Washdown Severe Duty Motor	WFR0/72C WFR Series 3/4 Horsepower (hp), 3600 Revolutions Per Minute (rpm), and 56C Frame Three Phase NEMA Premium Footed C-Face F1 TEFC Stainless Steel Washdown Severe Duty Motor	WFR0/74C WFR Series 3/4 Horsepower (hp), 1800 Revolutions Per Minute (rpm), and 56C Frame Three Phase NEMA Premium Footed C-Face F1 TEFC Stainless Steel Washdown Severe Duty Motor	WFR0012C WFR Series 1 Horsepower (hp), 3600 Revolutions Per Minute (rpm), and 56C Frame Three Phase NEMA Premium Footed C-Face F1 TEFC Stainless Steel Washdown Severe Duty Motor
Description	N/A AEGP, NEMA Premium, TEFC
Brands	N/A TECO
Power	N/A 1/2 hp	N/A 1/2 hp	N/A 3/4 hp	N/A 3/4 hp	N/A 1 hp
Speed	N/A 3600 rpm	N/A 1800 rpm	N/A 3600 rpm	N/A 1800 rpm	N/A 3600 rpm
Frame Number	N/A 56C
Full Load Efficiency	N/A 75.0 %	N/A 80.0 %	N/A 77.0 %	N/A 80.0 %	N/A 77.0 %
Full Load Power Factor	N/A 79.0 %	N/A 65.0 %	N/A 84.0 %	N/A 68.0 %	N/A 90.0 %
Full Load Ampere at 230 Volt (V)	N/A 0.80 A	N/A 0.90 A	N/A 1.10 A	N/A 1.30 A	N/A 1.40 A
Approximate Shipping Weight	N/A 37 lb	N/A 37 lb	N/A 39 lb	N/A 39 lb	N/A 37 lb
Enclosure	N/A Total Enclosed Non-Ventilated (IP66) (IEEE45) Totally Enclosed Fan Cooled (IP66) (IEEE 45)
Voltage	N/A 230 V460 V
Phase	N/A Three
Frequency	N/A 50 Hz60 Hz
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Continuous Service Factor for 50 Hertz (Hz) Frequency	N/A 1.0
Ambient Temperature¹	N/A 40 ºC
Elevation²	N/A 3300 ft
Shaft Material	N/A SUS304 Stainless Steel Shaft
Certification	N/A Canadian Standards Association (CSA) CC002A European Conformity (CE) National Electrical Manufacturers Association (NEMA) Underwriters Laboratories (UL)
Junction Box Mounting	N/A F1
Applications	N/A Any Application Where the Motor Will be Subjected to High Pressure Spray Down Marine Duty Food Processing and Packaging
Features	N/A Class F Insulation Class B Temperature Rise NEMA Design B Torques Stainless Steel Frame, End Brackets and Hardware Grounding Terminal Inside Main Conduit Box Stainless Steel Oversized Main Conduit Box - F3 Mounted for TEFC Footed, F1 Mounted for TEFC, and F1 Mounted for TENV Footed Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Sealed Bearings Pre-Packed with POLYREX™ EM Contact Lip Type Seal on Both Ends Etched Nameplate on the Stainless Steel Frame Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 (Motor service factor is 1.0 when operated on a VFD.)(Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.) Inverter Duty Speed Range: 10:1 Variable Torque, 4:1 Constant Torque 9 Leads Four Drain Holes on DE/NDE brackets Motors are U.L. Recognized, CSA Approved and CE Marked Department of Energy Efficiency Certificate # CC082A Encapsulated windings available for all Washdown motors (Food grade grease is available with M16 Mod.) IP69K available for all Washdown motors BISSC third party verified	N/A Class F Insulation Class B Temperature Rise NEMA Design B Torques Stainless Steel Frame, End Brackets and Hardware Grounding Terminal Inside Main Conduit Box Stainless Steel Oversized Main Conduit Box - F3 Mounted for TEFC Footed, F1 Mounted for TEFC, and F1 Mounted for TENV Footed Designed for 40°C Ambient Temperature (Consult a Stock Product Application Specialist for suitability in higher ambient environments.) Designed for 3300 ft. Elevation (Consult a Stock Product Application Specialist for suitability at higher elevations.) Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Sealed Bearings Pre-Packed with POLYREX™ EM Contact Lip Type Seal on Both Ends Etched Nameplate on the Stainless Steel Frame Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 (Motor service factor is 1.0 when operated on a VFD.)(Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.) Inverter Duty Speed Range: 10:1 Variable Torque, 4:1 Constant Torque 9 Leads Four Drain Holes on DE/NDE brackets Motors are U.L. Recognized, CSA Approved and CE Marked Department of Energy Efficiency Certificate # CC082A Encapsulated windings available for all Washdown motors (Food grade grease is available with M16 Mod.) IP69K available for all Washdown motors BISSC third party verified	N/A Class F Insulation Class B Temperature Rise NEMA Design B Torques Stainless Steel Frame, End Brackets and Hardware Grounding Terminal Inside Main Conduit Box Stainless Steel Oversized Main Conduit Box - F3 Mounted for TEFC Footed, F1 Mounted for TEFC, and F1 Mounted for TENV Footed Designed for 40°C Ambient Temperature (Consult a Stock Product Application Specialist for suitability in higher ambient environments.) Designed for 3300 ft. Elevation (Consult a Stock Product Application Specialist for suitability at higher elevations.) Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Sealed Bearings Pre-Packed with POLYREX™ EM Contact Lip Type Seal on Both Ends Etched Nameplate on the Stainless Steel Frame Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 (Motor service factor is 1.0 when operated on a VFD.)(Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.) Inverter Duty Speed Range: 10:1 Variable Torque, 4:1 Constant Torque 9 Leads Four Drain Holes on DE/NDE brackets Motors are U.L. Recognized, CSA Approved and CE Marked Department of Energy Efficiency Certificate # CC082A Encapsulated windings available for all Washdown motors (Food grade grease is available with M16 Mod.) IP69K available for all Washdown motors BISSC third party verified	N/A Class F Insulation Class B Temperature Rise NEMA Design B Torques Stainless Steel Frame, End Brackets and Hardware Grounding Terminal Inside Main Conduit Box Stainless Steel Oversized Main Conduit Box - F3 Mounted for TEFC Footed, F1 Mounted for TEFC, and F1 Mounted for TENV Footed Designed for 40°C Ambient Temperature (Consult a Stock Product Application Specialist for suitability in higher ambient environments.) Designed for 3300 ft. Elevation (Consult a Stock Product Application Specialist for suitability at higher elevations.) Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Sealed Bearings Pre-Packed with POLYREX™ EM Contact Lip Type Seal on Both Ends Etched Nameplate on the Stainless Steel Frame Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 (Motor service factor is 1.0 when operated on a VFD.)(Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.) Inverter Duty Speed Range: 10:1 Variable Torque, 4:1 Constant Torque 9 Leads Four Drain Holes on DE/NDE brackets Motors are U.L. Recognized, CSA Approved and CE Marked Department of Energy Efficiency Certificate # CC082A Encapsulated windings available for all Washdown motors (Food grade grease is available with M16 Mod.) IP69K available for all Washdown motors BISSC third party verified	N/A Class F Insulation Class B Temperature Rise NEMA Design B Torques Stainless Steel Frame, End Brackets and Hardware Grounding Terminal Inside Main Conduit Box Stainless Steel Oversized Main Conduit Box - F3 Mounted for TEFC Footed, F1 Mounted for TEFC, and F1 Mounted for TENV Footed Designed for 40°C Ambient Temperature (Consult a Stock Product Application Specialist for suitability in higher ambient environments.) Designed for 3300 ft. Elevation (Consult a Stock Product Application Specialist for suitability at higher elevations.) Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Sealed Bearings Pre-Packed with POLYREX™ EM Contact Lip Type Seal on Both Ends Etched Nameplate on the Stainless Steel Frame Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 (Motor service factor is 1.0 when operated on a VFD.)(Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.) Inverter Duty Speed Range: 10:1 Variable Torque, 4:1 Constant Torque 9 Leads Four Drain Holes on DE/NDE brackets Motors are U.L. Recognized, CSA Approved and CE Marked Department of Energy Efficiency Certificate # CC082A Encapsulated windings available for all Washdown motors (Food grade grease is available with M16 Mod.) IP69K available for all Washdown motors BISSC third party verified
Note	N/A Data subject to change without notice. This equipment has been independently verified to conform to the ANSI/ASB/Z50.2 standard.
¹ Consult a Stock Product Application Specialist for suitability in higher ambient environments. ² Consult a Stock Product Application Specialist for suitability at higher elevations.