Gainesville Industrial Electric Co. - MAX-VSP™ VSTP Series NEMA Premium, Three Phase TEFC, Vertical Solid Shaft Motors

AEEHED (MAX-VSTP™) NEMA Premium (VSPT)

Request Information Search by Specification

Unit of Measure

Items	VSTP0154 MAX-VSP™ VSTP Series 15 Horsepower (hp), 1800 Revolutions Per Minute (rpm) Speed, and 254VP Frame Three Phase NEMA Premium TEFC Vertical Solid Shaft Motor	VSTP0156 MAX-VSP™ VSTP Series 15 Horsepower (hp), 1200 Revolutions Per Minute (rpm) Speed, and 284VP Frame Three Phase NEMA Premium TEFC Vertical Solid Shaft Motor	VSTP0158 MAX-VSP™ VSTP Series 15 Horsepower (hp), 900 Revolutions Per Minute (rpm) Speed, and 286VP Frame Three Phase NEMA Premium TEFC Vertical Solid Shaft Motor	VSTP0204 MAX-VSP™ VSTP Series 20 Horsepower (hp), 1800 Revolutions Per Minute (rpm) Speed, and 256VP Frame Three Phase NEMA Premium TEFC Vertical Solid Shaft Motor	VSTP0206 MAX-VSP™ VSTP Series 20 Horsepower (hp), 1200 Revolutions Per Minute (rpm) Speed, and 286VP Frame Three Phase NEMA Premium TEFC Vertical Solid Shaft Motor
Description	N/A AEEHNH, (MAX-VHP™) NEMA Premium
Brands	N/A TECO
Power	N/A 15 hp	N/A 15 hp	N/A 15 hp	N/A 20 hp	N/A 20 hp
Speed	N/A 1800 rpm	N/A 1200 rpm	N/A 900 rpm	N/A 1800 rpm	N/A 1200 rpm
Frame Number	N/A 254VP	N/A 284VP	N/A 286VP	N/A 256VP	N/A 286VP
Full Load Efficiency	N/A 92.4 %	N/A 92.4 %	N/A 90.2 %	N/A 93.0 %	N/A 91.7 %
Full Load Power Factor	N/A 88.0 %	N/A 83.5 %	N/A 78.0 %	N/A 87.5 %	N/A 84.0 %
Full Load Ampere at 460 Volt (V) Voltage	N/A 17.3 A	N/A 16.4 A	N/A 20.0 A	N/A 23.0 A	N/A 22.1 A
Approximate Shipping Weight	N/A 350 lb	N/A 460 lb	N/A 520 lb	N/A 450 lb	N/A 520 lb
Down Thrust	N/A 3,350 lb	N/A 3,850 lb	N/A 4,400 lb	N/A 3,350 lb	N/A 3,850 lb
Dimension BD	N/A 10.0 in
Enclosure	N/A Totally Enclosed Fan Cooled (IP55)
Voltage	N/A 230 V460 V
Phase	N/A Three
Service Factor for 60 Hertz (Hz) Frequency on Continuous Sine Wave Power	N/A 1.15
Ambient Temperature	N/A 40 ºC
Elevation	N/A 3300 ft
Applications	N/A Deep Well Turbine Pumps Irrigation Water/Wastewater
Features	N/A Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only 230/460V Motors Suitable for Partial Winding Start (at 230V Only) Three Phase, 60 Hz, 1.15 Service Factor (Continuous on Sine Wave Power) CSA Certified for Class I, Div. 2, Group B, C, D - Temp Code T3 Minimum Inverter Duty (PWM) per NEMA® MG-1 Part 31 at 1.0 Service Factor Dual Column (60/50 Hz) Design Nameplate as Standard; 50 HData 190/380V at 1.0 S.F. Standard Features: Non-Sparking Ball Type NRR, Drip/Splash Cover, Space Heaters (120V) 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing CSA Certified for Class I, Div. 2, Groups B, C, D; Temp Code T3 minimum Class F Insulation with Phenolic Alkyd Resin Varnish Class B Temperature Rise NEMA Design B Torques Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance Cast Iron Conduit Box for F#449TP and Below; Steel Plate Conduit Box for F#5000 Designed for 40?C Ambient Temperature Designed for 3300 ft. Elevation Counterclockwise (CCW) Rotation; Viewed from Top Cast Iron Frame & End Brackets 1045 Solid Carbon Steel Shaft Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Blue - Munsell 5PB 3/8 Guide Bearings: 254VP - 286VP frames are Grease Pre-packed Double Shielded Bearings (MULTEMP SRL) 324VP - 5009VP frames are Re-Greasable (Mobil Polyrex EM) Thrust Bearings: 254VP - 286VP frames are Re-Greasable Angular Contact (Mobil Polyrex EM); 324VP - 449VP frames are Oil Lubricated Angular Contact; F#5000 and Above with Spherical Roller Oil Requirements for 324VP-405VP - 145 to 175 S.S.U. @100°F Oil Requirements for 444VP-5810VP - 300 S.S.U. @100°F Grounding Terminal Inside Main Box Stainless Steel Nameplate and Rodent Screens 12 Leads (PWS on 230V) on 254VP - 405VP; 6 Leads on 444VP to 449VP; 5000 Frames and Above with Connection Studs Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 - 10:1 Variable Torque with NRR. 10:1 C.T., 20:1 VT without NRR Using Braking in VFD Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA MG-1 Part 31 Suitable for Wye/Delta start at 230V or 460V. Suitable for Wye/Delta start at 460V.
Note	N/A Suitable for Wye/Delta start at 230V or 460V. Suitable for Wye/Delta start at 460V. In order to confirm the TWMC standard coupling size is suitable for customer requirements or to select an alternate coupling size. Required coupling size must be noted on all vertical hollow shaft motors orders. Coupling will be changed out prior to shipping if a non-TW standard coupling size is needed. Data subject to change without notice.