Gainesville Industrial Electric Co.
Gainesville Industrial Electric Co.
1011 Athens Street
Gainesville, GA 30501

Toll Free: 1-800-457-6210
Local : 770-532-4411
Fax : 770-532-4496
Email: sales@anametelectrical.com
Website: www.gainesvilleindustrial.com
Print Back
AMRCED (MAX-VSP™) NEMA Premium Low Voltage.
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 600 hp

Speed

 N/A 1800 rpm

Frame Number

 N/A 5808VP

Full Load Efficiency

 N/A 96.2 %

Full Load Power Factor

 N/A 90.6 %

Full Load Ampere at 230 Volt (V)

 N/A 645 A

Down Thrust

 N/A 30400 lb

Dimension BD

 N/A 30.0 in

Approximate Shipping Weight

 N/A 5,470 lb

Enclosure

 N/A Weather Protected Type I (WPI)

Voltage

 N/A 460 V

Phase

 N/A Three

Frequency

 N/A 60 Hz

Continuous Service Factor for 60 Hertz (Hz) Frequency

 N/A 1.15
Ambient Temperature1 N/A 40 ºC
Elevation2 N/A 3300 ft

Shaft Material

 N/A 1045 Solid Carbon Steel Shaft

Certification

 N/A Canadian Standards Association (CSA) European Conformity (CE) Fire Safety National Electrical Manufacturers Association (NEMA) Premium Underwriters Laboratories (UR)

Applications

Applications

 N/A
  • Deep Well Turbine Pumps
  • Irrigation
  • Fire Pumps
  • Fluid Handling Systems
  • Water/Wastewater

Features

Features

 N/A
  • Inverter Duty (PWM) per NEMA® MG-1 Part 31
  • Dual Column Design Nameplate as Standard; 50 Hz Data 190/380V
  • Standard Features: Ball Type NRR, Drip/Splash Cover, Space Heaters (120V)
  • 5000 Frames and Above include Mounting Provisions for bearing RTD's and Insulated Bearing Housing
  • Class F Insulation with Phenolic Alkyd Resin Varnish
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance
  • Cast Iron Conduit Box for F#449VP and Below; Steel Plate Conduit Box for F#5000
  • Counterclockwise (CCW) Rotation; Viewed from Top
  • Cast Iron Frame & End Brackets
  • Aluminum Die Cast Squirrel Cage Rotor Construction for F#449VP and Below
  • Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color for AMRCED (MAX-VSP™): Blue - Munsell 5PB 3/8
  • Guide Bearings: 254VP - 286VP frames are Grease Pre-packed Double Shielded Bearings (MULTEMP SRL); 324VP - 5009VP frames are Re-Greasable (Mobil Polyrex EM)
  • Thrust Bearings: 254VP - 286VP frames are Re-Greasable Angular Contact (Mobil Polyrex EM); 324VP - 449VP frames are Oil Lubricated Angular Contact; F#5000 and Above with Spherical Roller
  • Oil Requirements for 324VP-405VP - 145 to 175 S.S.U. @100°F
  • Oil Requirements for 444VP-5810VP - 300 S.S.U. @100°F
  • Grounding Terminal Inside Main Box
  • Stainless Steel Nameplate and Rodent Screens
  • 12 Leads (PWS on 230V), Wye/Delta on 230/460V for 210VP-400VP;
    • Suitable for Wye/Delta start at 230V or 460V.
  • 6 Leads (PWS on 230V, Wye D on 460V for 444VP-5810VP)
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 - 10:1 Variable Torque with NRR. 10:1 C.T., 20:1 VT without NRR Using Braking in VFD
  • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA MG-1 Part 31.

Note

Note

 N/A Fire Pump available as made to order. Fire Pump Certificate complies with ANSI/UL 1004-5. Certificate# 20120717 - EX6569.

Delivery for Fire Pump Duty motor (Catalog Number + FP) is standard 5 - 10 working days after receipt of order if standard motor is in stock;

Painting to Fire Safety Red requirement on Fire Pump Duty type motor can be waived in order to expedite delivery upon request.

Fire Pump Duty Motor pricing includes: adding UL nameplate, restamping original nameplate to new "VSP_FP" catalog number, and Fire Safety Red Paint.

Data subject to change without notice.
  • 1 Consult a Stock Product Application Specialist for suitability in higher ambient environments.
  • 2 Consult a Stock Product Application Specialist for suitability at higher elevations.