Gainesville Industrial Electric Co. - VSKTP Series NEMA Premium, Three Phase, TEFC, Vertical Solid Shaft Motors

AEHCED, Premium Efficiency

Request Information

Unit of Measure

Items	VSKTP1506 VSKTP Series Vertical Solid Shaft NEMA Premium 150 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 449VP Frame Three Phase TEFC Vertical Solid Shaft Motor	VSKTP2004 VSKTP Series Vertical Solid Shaft NEMA Premium 200 Horsepower (hp), 1800 Revolutions Per Minute (rpm), and 449VP Frame Three Phase TEFC Vertical Solid Shaft Motor	VSKTP2006 VSKTP Series Vertical Solid Shaft NEMA Premium 200 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 449VP Frame Three Phase TEFC Vertical Solid Shaft Motor	VSKTP2504 VSKTP Series Vertical Solid Shaft NEMA Premium 250 Horsepower (hp), 1800 Revolutions Per Minute (rpm), and 449VP Frame Three Phase TEFC Vertical Solid Shaft Motor	VSKTP2506 VSKTP Series Vertical Solid Shaft NEMA Premium 250 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 5009VP Frame Three Phase TEFC Vertical Solid Shaft Motor
Description	N/A AEHCED, NEMA Premium. High Thrust With "P" Base - Medium Voltage.
Brands	N/A TECO
Power	N/A 150 hp	N/A 200 hp	N/A 200 hp	N/A 250 hp	N/A 250 hp
Speed	N/A 1200 rpm	N/A 1800 rpm	N/A 1200 rpm	N/A 1800 rpm	N/A 1200 rpm
Frame Number	N/A 449VP	N/A 449VP	N/A 449VP	N/A 449VP	N/A 5009VP
Full Load Efficiency	N/A 95.0 %
Full Load Power Factor	N/A 80.1 %	N/A 82.9 %	N/A 76.2 %	N/A 83.7 %	N/A 81.9 %
Full Load Ampere at 4000 Volt (V) Voltage	N/A 18.0 A	N/A 23.5 A	N/A 25.5 A	N/A 29.0 A	N/A 30.0 A
Down Thrust	N/A 11,400 lb	N/A 10,000 lb	N/A 11,400 lb	N/A 10,000 lb	N/A 12,100 lb
Dimension BD	N/A 20.0 in	N/A 20.0 in	N/A 20.0 in	N/A 20.0 in	N/A 24.5 in
Approximate Shipping Weight	N/A 2,950 lb	N/A 2,830 lb	N/A 3,760 lb	N/A 3,920 lb	N/A 4,040 lb
Enclosure	N/A Totally Enclosed Fan Cooled (IP55)
Voltage	N/A 2300 V4000 V
Phase	N/A Three
Frequency	N/A 60 Hz
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Ambient Temperature¹	N/A 40 ºC
Elevation²	N/A 3300 ft
Shaft Material	N/A 1045 Solid Carbon Steel Shaft
Certification	N/A Canadian Standards Association (CSA) European Conformity (CE) Fire Safety National Electrical Manufacturers Association (NEMA) Premium Underwriters Laboratories (UR)
Dimension U	N/A 2.625	N/A 2.625	N/A 2.625	N/A 2.625	N/A 2.875
Dimension AH	N/A 5.00
Applications	N/A Deep Well Turbine Pumps Irrigation Water/Wastewater
Features	N/A Inverter Duty (PWM) per NEMA® MG-1 Part 31 Standard Features: Non-Sparking Ball Type NRR, Drip/Splash Cover, Space Heaters (120V) 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing CSA Certified for Class I, Div. 2, Groups B, C, D; Temp Code T3 minimum Class F Insulation with VPI Epoxy Resin Varnish Class B Temperature Rise NEMA Design B Torques Fab Steel Plate Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance Steel Plate Conduit Box with Threaded Connection Opening(s) Designed for 40°C Ambient Temperature¹ Designed for 3300 ft. Elevation² Oversized Angular Contact or Spherical Thrust Bearing Installed Counterclockwise (CCW) Rotation; Viewed from Top Cast Iron Frame & End Brackets; Steel Plate Fan Cover Aluminum Die Cast Squirrel Cage Rotor Construction for F#449VP and Below Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000 and Above Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Blue - Munsell 5PB 3/8 Guide Bearings: Re-Greasable with Mobil Polyrex™ EM Grease Thrust Bearings: Oil Lubricated Angular Contact or Spherical Thrust bearing with Site Glass Oil Requirements: 300 S.S.U. @ 100°F Automatic Grease Discharge Fittings on Frames with Re-Greasable Motors Metal Flinger on Both Ends for Frames 320VP & Up Grounding Terminal Inside Main Box Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Speed Ranges: 10:1 VT, 4:1 CT 6 Leads UL Recognized and CSA Approved Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA-MG-1 Part 31	N/A Inverter Duty (PWM) per NEMA® MG-1 Part 31 Standard Features: Non-Sparking Ball Type NRR, Drip/Splash Cover, Space Heaters (120V) 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing CSA Certified for Class I, Div. 2, Groups B, C, D; Temp Code T3 minimum Class F Insulation with VPI Epoxy Resin Varnish Class B Temperature Rise NEMA Design B Torques Fab Steel Plate Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance Steel Plate Conduit Box with Threaded Connection Opening(s) Designed for 40°C Ambient Temperature¹ Designed for 3300 ft. Elevation² Oversized Angular Contact or Spherical Thrust Bearing Installed Counterclockwise (CCW) Rotation; Viewed from Top Cast Iron Frame & End Brackets; Steel Plate Fan Cover Aluminum Die Cast Squirrel Cage Rotor Construction for F#449VP and Below Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000 and Above Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Blue - Munsell 5PB 3/8 Guide Bearings: Re-Greasable with Mobil Polyrex™ EM Grease Thrust Bearings: Oil Lubricated Angular Contact or Spherical Thrust bearing with Site Glass Oil Requirements: 300 S.S.U. @ 100°F Automatic Grease Discharge Fittings on Frames with Re-Greasable Motors Metal Flinger on Both Ends for Frames 320VP & Up Grounding Terminal Inside Main Box Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Speed Ranges: 10:1 VT, 4:1 CT 6 Leads UL Recognized and CSA Approved Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA-MG-1 Part 31	N/A Inverter Duty (PWM) per NEMA® MG-1 Part 31 Standard Features: Non-Sparking Ball Type NRR, Drip/Splash Cover, Space Heaters (120V) 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing CSA Certified for Class I, Div. 2, Groups B, C, D; Temp Code T3 minimum Class F Insulation with VPI Epoxy Resin Varnish Class B Temperature Rise NEMA Design B Torques Fab Steel Plate Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance Steel Plate Conduit Box with Threaded Connection Opening(s) Designed for 40°C Ambient Temperature¹ Designed for 3300 ft. Elevation² Oversized Angular Contact or Spherical Thrust Bearing Installed Counterclockwise (CCW) Rotation; Viewed from Top Cast Iron Frame & End Brackets; Steel Plate Fan Cover Aluminum Die Cast Squirrel Cage Rotor Construction for F#449VP and Below Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000 and Above Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Blue - Munsell 5PB 3/8 Guide Bearings: Re-Greasable with Mobil Polyrex™ EM Grease Thrust Bearings: Oil Lubricated Angular Contact or Spherical Thrust bearing with Site Glass Oil Requirements: 300 S.S.U. @ 100°F Automatic Grease Discharge Fittings on Frames with Re-Greasable Motors Metal Flinger on Both Ends for Frames 320VP & Up Grounding Terminal Inside Main Box Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Speed Ranges: 10:1 VT, 4:1 CT 6 Leads UL Recognized and CSA Approved Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA-MG-1 Part 31	N/A Inverter Duty (PWM) per NEMA® MG-1 Part 31 Standard Features: Non-Sparking Ball Type NRR, Drip/Splash Cover, Space Heaters (120V) 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing CSA Certified for Class I, Div. 2, Groups B, C, D; Temp Code T3 minimum Class F Insulation with VPI Epoxy Resin Varnish Class B Temperature Rise NEMA Design B Torques Fab Steel Plate Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance Steel Plate Conduit Box with Threaded Connection Opening(s) Designed for 40°C Ambient Temperature¹ Designed for 3300 ft. Elevation² Oversized Angular Contact or Spherical Thrust Bearing Installed Counterclockwise (CCW) Rotation; Viewed from Top Cast Iron Frame & End Brackets; Steel Plate Fan Cover Aluminum Die Cast Squirrel Cage Rotor Construction for F#449VP and Below Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000 and Above Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Blue - Munsell 5PB 3/8 Guide Bearings: Re-Greasable with Mobil Polyrex™ EM Grease Thrust Bearings: Oil Lubricated Angular Contact or Spherical Thrust bearing with Site Glass Oil Requirements: 300 S.S.U. @ 100°F Automatic Grease Discharge Fittings on Frames with Re-Greasable Motors Metal Flinger on Both Ends for Frames 320VP & Up Grounding Terminal Inside Main Box Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Speed Ranges: 10:1 VT, 4:1 CT 6 Leads UL Recognized and CSA Approved Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA-MG-1 Part 31	N/A Inverter Duty (PWM) per NEMA® MG-1 Part 31 Standard Features: Non-Sparking Ball Type NRR, Drip/Splash Cover, Space Heaters (120V) 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing CSA Certified for Class I, Div. 2, Groups B, C, D; Temp Code T3 minimum Class F Insulation with VPI Epoxy Resin Varnish Class B Temperature Rise NEMA Design B Torques Fab Steel Plate Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance Steel Plate Conduit Box with Threaded Connection Opening(s) Designed for 40°C Ambient Temperature¹ Designed for 3300 ft. Elevation² Oversized Angular Contact or Spherical Thrust Bearing Installed Counterclockwise (CCW) Rotation; Viewed from Top Cast Iron Frame & End Brackets; Steel Plate Fan Cover Aluminum Die Cast Squirrel Cage Rotor Construction for F#449VP and Below Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000 and Above Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Blue - Munsell 5PB 3/8 Guide Bearings: Re-Greasable with Mobil Polyrex™ EM Grease Thrust Bearings: Oil Lubricated Angular Contact or Spherical Thrust bearing with Site Glass Oil Requirements: 300 S.S.U. @ 100°F Automatic Grease Discharge Fittings on Frames with Re-Greasable Motors Metal Flinger on Both Ends for Frames 320VP & Up Grounding Terminal Inside Main Box Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Speed Ranges: 10:1 VT, 4:1 CT 6 Leads UL Recognized and CSA Approved Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA-MG-1 Part 31
Note	N/A Data subject to change without notice.
¹ Consult a Stock Product Application Specialist for suitability in higher ambient environments. ² Consult a Stock Product Application Specialist for suitability at higher elevations.