Exit
1011 Athens Street
Gainesville, GA 30501 USA
Gainesville Industrial Electric
AEHHXG/AEHHXF, NEMA Premium, Footed C-Face
Unit of Measure

Specifications

Brands

N/A TECO

Power

N/A 60 hp

Speed

N/A 3600 rpm

Frame Number

N/A 364TSC

Full Load Efficiency

N/A 94.1 %

Full Load Power Factor

N/A 93.0 %

Full Load Ampere at 460 Volt (V) Voltage

N/A 64.2 A

Approximate Shipping Weight

N/A 1,015 lb

Enclosure

N/A Totally Enclosed Fan Cooled - Explosion Proof (IP55)

Inverter Duty

N/A Variable Torque = 3 - 60 Hz
Constant Torque for 140T - 210T Frames = 10 - 60 Hz
Constant Torque for 250T - 320T Frames = 13 - 60 Hz
Constant Torque for 360T - 440T Frames = 16 - 60 Hz
Constant Torque for 5000 Frames = 15 - 60 Hz
Variable Torque for 5000 Frames = 3 - 60 Hz
Voltage1 N/A 230 V460 V

Phase

N/A Three

Frequency

N/A 60 Hz

Continuous Service Factor for 60 Hertz (Hz) Frequency

N/A 1.15

Continuous Service Factor for 50 Hertz (Hz) Frequency

N/A 1.0
Ambient Temperature2 N/A 40 ºC
Elevation3 N/A 3300 ft

Shaft Material

N/A 1045 Carbon Steel

Industry Standards and Approval

N/A Canadian Standards Association (CSA) ee CCOO2A NEMA Premium Underwriters Laboratories

Applications

Applications

N/A
  • Grain Elevators
  • Applications Where Explosive Gases are Present
  • Pumps
  • Applications Where Explosive Dusts/Grains are Present
  • Blowers

Features

Features

N/A
  • Class I, Div. 1, Group C & D and Class II, Groups E, F and G - Temp Code T3B Up to and Including F# 256T
  • Class I, Div. 1, Group D and Class II, Groups E, F and G - Temp Code T3B for F# 284T and Larger
  • UL File: E84757
  • CSA File: #64671
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Standard with Klixon 9700K Temperature Limiting Switch, 1 per Phase
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
  • Dual Drilled Back Feet on 447/9 and 5007/9 Frames
  • Bi-Directional Rotation
  • Cast Iron Frame, Fan Cover, End Brackets and Main Conduit Box
  • Capable of Withstanding Explosion Force as Required by UL
  • Stainless Steel Breather Drains with Bronze Filters (For Horizontal Mount Only)
  • Aluminum Die Cast Squirrel Cage Rotor Construction through 449 Frame; Fabricated Copper Bar on 5000 Frame
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Dark Blue - Munsell 5 PB 4.5/2
  • Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T - 280T (Non-regreasable)
  • High Quality Ball (or Roller) Bearings Regreasable with Mobil PolyrexTM EM for F# 280TS and Larger
  • Bronze Flinger on Both Ends
  • Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger
  • Stainless Steel Nameplate
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
    • Motor Service Factor is 1.0 when operated on a VFD.
    • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.
    UL Listed for Inverter Duty
  • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of up to 2200 Volts
  • 9 Leads for 5 HP and Smaller
  • 12 Leads for 7.5 HP to 125 HP
  • 6 Leads for 150 HP and Larger

Note

Note

N/A Data subject to change without notice.
Extras/Modification options are limited on TEXP Products. Available options: M2X, M8B, M11(449T frame and below, maybe all),M16; M8; M18A;M15; M14; M21A; M22.
  • 1 Available in 575V. TWMC carries minimal 575V stock; please check availability to ensure required motors are in stock. Ratings may be available from our Canadian warehouses and/or our factory. Pricing and leadtime may vary.
  • 2 Consult a Stock Product Application Specialist for suitability in higher ambient environments.
  • 3 Consult a Stock Product Application Specialist for suitability at higher elevations.