Exit
SearchSearch
1011 Athens Street
Gainesville, GA 30501 USA
Gainesville Industrial Electric
Request Information
ASGH, NEMA Premium with AEGIS® SGR
The AEGIS® SGR Bearing Protection Ring prevents electrical bearing "fluting" damage by safely diverting harmful shaft voltages and bearing currents to ground. Using proprietary Electron Transport Technology™, the conductive microfibers inside the AEGIS® SGR provide the most reliable current diversion technology for shaft grounding with a "path of least resistance" to dramatically extend motor life. AEGIS® Shaft Grounding Rings have a warranty of 1 year.
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 10 hp

Speed

 N/A 1200 rpm

Frame Number

 N/A 254/256T

Full Load Efficiency

 N/A 91.7 %

Full Load Power Factor

 N/A 79.5 %

Full Load Ampere at 230 Volt (V)

 N/A 25.7 A

Approximate Shipping Weight

 N/A 292 lb

Enclosure

 N/A Open Drip Proof (IP22)

Voltage

 N/A 230 V460 V

Phase

 N/A Three

Continuous Service Factor for 60 Hertz (Hz) Frequency

 N/A 1.15

Continuous Service Factor for 50 Hertz (Hz) Frequency

 N/A 1.0

Ambient Temperature

 N/A 40 ºC

Elevation

 N/A 3300 ft

Shaft Material

 N/A 1045 Carbon Steel

Applications

Applications

 N/A
  • Fans and Blowers
  • Pumps
  • Compressors
  • HVAC Equipment

Features

Features

 N/A
  • Grounding Ring Factory Installed Externally on DE Bracket
  • Class F Insulation
  • NEMA Design B Torques
  • Rolled Steel Frame and Main Conduit Box
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Only (F2 not available)
  • Bi-Directional Rotation
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Blue - Munsell 5PB 3/8
  • Double Shielded Bearings Pre-Packed with MULTEMP SRL (Non-regreasable)
  • Stainless Steel Nameplate
  • Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 (3,4)
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
  • 9 Leads for 5 HP and Smaller
  • 12 Leads for 7.5 HP and Larger
  • Motors are U.L. Recognized for United States and Canada, CSA Approved and CE Marked

Note

Note

 N/A Motor service factor is 1.0 when operated on a VFD.
Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.
AEGIS® SGR Bearing Protection Ring can not be used in Hazardous Locations (e.g. Class I, Div. 2, etc.)
1. AEGIS® SGR Rings have a warranty of 1 year.
Data subject to change without notice.
Copyright © 2024 Gainesville Industrial Electric Co., All Rights Reserved   Site created by Thomas Web Solutions and Powered by Navigator Platform