Exit
SearchSearch
1011 Athens Street
Gainesville, GA 30501 USA
Gainesville Industrial Electric
Request Information
ASHH, NEMA Premium
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 1.5 hp

Speed

 N/A 3600 rpm

Frame Number

 N/A 143T

Full Load Efficiency

 N/A 85.5 %

Full Load Power Factor

 N/A 80.0 %

Full Load Ampere at 460/575 Volt (V) Voltage

 N/A 2.06 A

Approximate Shipping Weight

 N/A 50 lb

Enclosure

 N/A Open Drip Proof (IP22)

Voltage

 N/A 230 V460 V

Phase

 N/A Three

Continuous Service Factor for 60 Hertz (Hz) Frequency

 N/A 1.15

Continuous Service Factor for 50 Hertz (Hz) Frequency

 N/A 1.0

Ambient Temperature

 N/A 40 ºC

Elevation

 N/A 3300 ft

Shaft Material

 N/A 1045 Carbon Steel

Industry Standards and Approval

 N/A Underwriters Laboratories

Applications

Applications

 N/A
  • Fans and Blowers
  • Pumps
  • HVAC Equipment
  • Compressors
  • Fire Pumps

Features

Features

 N/A
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Cast Iron Frame and End Brackets
  • Rolled Steel Main Conduit Box
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
  • Bi-Directional Rotation
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Light Gray - Munsell N5.0
  • Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T - 280T (Non-regreasable)
  • High Quality Ball (or Roller) Bearings regreasable with Mobil Polyrex™ EM for F# 280TS and Larger
  • Labyrinth Type Metal Flinger on Both Ends for F# 280TS and Larger
  • Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger
  • Stainless Steel Nameplate
  • New Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2(4,5)
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
  • 9 Leads for 5 HP and Smaller
  • 12 Leads for 7.5 HP to 125 HP
  • 6 Leads for 150 HP and Larger
  • Motors are U.L. Recognized, CSA Approved and CE Marked

Note

Note

 N/A Fire Pump available.
Available in 575V. TWMC carries minimal 575V stock; please check availability to ensure required motors are in stock. Ratings may be available from our Canadian warehouses and/or our factory. Pricing and leadtime may vary.
Motor service factor is 1.0 when operated on a VFD.
Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1.
Delivery for Fire Pump Duty motor (Catalog Number + FP) is standard 5 - 10 working days after receipt of order if standard motor is in stock; Painting to Fire Safety Red requirement on Fire Pump Duty type motor can be waived in order to expedite delivery upon request.
Fire Pump Duty Motor pricing includes: adding UL nameplate, restamping original nameplate to new "DHP_FP" catalog number,
To order 575V, add "5" to the end of Catalog Number, for example: "DHP00545" for 5 HP, 1800 RPM, 575V.
"R" = Motor stocked standard with a Drive-End Roller Bearing.
Ratings 150 HP and larger are 460V only.
Data subject to change without notice.
Copyright © 2024 Gainesville Industrial Electric Co., All Rights Reserved   Site created by Thomas Web Solutions and Powered by Navigator Platform