Exit
1011 Athens Street
Gainesville, GA 30501 USA
Gainesville Industrial Electric
ASGHJP/JM, NEMA Premium, Close Coupled, (1 HP - 40 HP)
Unit of Measure

Specifications

Brands

N/A TECO

Power

N/A 20 hp

Speed

N/A 1800 rpm

Frame

N/A 254/256JM

Full-Load Efficiency

N/A 93.0 %

Full-Load Power Factor

N/A 83.0 %

Full-Load Ampere at 230 Volt (V) Voltage

N/A 48.5 A

Enclosure

N/A Open Drip Proof (IP22)

Voltage

N/A 230 V460 V

Phase

N/A 3

Continuous Service Factor for 60 Hertz (Hz) Frequency

N/A 1.15

Continuous Service Factor for 50 Hertz (Hz) Frequency

N/A 1.0
Ambient Temperature1 N/A 40 ºC
Elevation2 N/A 3300 ft

Approximate Shipping Weight

N/A 265 lb

Shaft Material

N/A 1045 Carbon Steel

Applications

Applications

N/A
  • Fans & Blowers
  • Pumps
  • HVAC Equipment
  • Compressors
  • Fire Pumps

Features

Features

N/A
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Rolled Steel Frame and Main Conduit Box
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Only (F2 not available)
  • Bi-Directional Rotation
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Light Gray - Munsell N5.0
  • Double Shielded Bearings Pre-Packed with MULTEMP SRL (Non-regreasable)
  • Stainless Steel Nameplate
  • Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31.
    • Motor service factor is 1.0 when operated on a VFD.
    • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
  • 9 Leads for 5 HP and Smaller
  • 12 Leads for 7.5 HP and Larger
  • Motors are U.L. Recognized for United States and Canada, CSA Approved and CE Marked
  • Fire Pump available.
  • 1 Consult a Stock Product Application Specialist for suitability in higher ambient environments.
  • 2 Consult a Stock Product Application Specialist for suitability at higher elevations.