Exit
SearchSearch
1011 Athens Street
Gainesville, GA 30501 USA
Gainesville Industrial Electric
Request Information
AEHH8NJM, NEMA Premium, Close-Coupled [JMP]
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 5 hp

Speed

 N/A 1800 rpm

Frame Number

 N/A 182/184JP

Full Load Efficiency

 N/A 89.5 %

Full Load Power Factor

 N/A 85.5 %

Full Load Ampere at 230 Volt (V)

 N/A 6.12 A

Approximate Shipping Weight

 N/A 126 lb

Enclosure

 N/A Totally Enclosed Fan-Cooled (IP54)

Voltage

 N/A 230 V460 V

Phase

 N/A Three

Frequency

 N/A 50 Hz60 Hz

Continuous Service Factor for 60 Hertz (Hz) Frequency

 N/A 1.15

Continuous Service Factor for 50 Hertz (Hz) Frequency

 N/A 1.0
Ambient Temperature1 N/A 40 ºC
Elevation2 N/A 3300 ft

Shaft Material

 N/A 1045 Carbon Steel

Applications

Applications

 N/A Pumps

Features

Features

 N/A
  • Voltage: 230/460V (Usable on 208V)
  • CSA Certified for Class I, Div. 2, Groups B, C & D - Temp Code T3C Minimum
    • CSA Certification for Hazardous Location only applies to AEHH8NJP/JM, NEMA premium [JPP/JMP] product line.
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Cast Iron Frame, End Brackets & Fan Cover and Main Conduit Box
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
  • Designed for 40ºC Ambient Temperature
  • Designed for 3300 ft. Elevation
  • Bi-Directional Rotation
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Premium - Light Gray - Munsell N5.0
    High Efficient - Dark Gray - Munsell 7.5B 3.5/0.5
  • Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140JP/JM - 280JP/JM (Non-regreasable)
  • High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM for F# 280JP/JM (2P), 320JP/JM and Larger
  • Automatic Grease Discharge Fittings on Regreasable Models
  • Rubber Dust Flinger on DE for F# 140JP/JM - 280JP/JM
  • Metal Flinger on Both Ends for F# 280JP/JM (2P), 320JP/JM and Larger
  • Cast Iron Inner and Outer Bearing Caps for Frame# 280JP/JM (2P), 320JP/JM and Larger
  • Stainless Steel Nameplate
  • Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
    • Motor service factor is 1.0 when operated on a VFD.
    • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.
  • Inverter Duty Speed Range: 10:1 Variable Torque, 5:1 Constant Torque
  • 9 Leads for 5 HP and Smaller
  • 12 Leads for 7.5 HP to 125 HP
  • Motors are U.L. Recognized, CSA Approved and CE Marked

Note

Note

 N/A Data subject to change without notice.
  • 1 Consult a Stock Product Application Specialist for suitability in higher ambient environments.
  • 2 Consult a Stock Product Application Specialist for suitability at higher elevations.
Copyright © 2024 Gainesville Industrial Electric Co., All Rights Reserved   Site created by Thomas Web Solutions and Powered by Navigator Platform