Item # EPV0506P, MAX-E1™ 50 Horsepower (hp) and 1200 Revolutions Per Minute (rpm) Vertical Round Body Solid Shaft Normal/Medium Thrust Three Phase TEFC Severe Duty Motor On Gainesville Industrial Electric Co.

Request Information

AEUH8NDP, NEMA Premium, Round Body

Unit of Measure

Specifications | Applications | Features | Note

Brands	N/A TECO
Power	N/A 50 hp
Speed	N/A 1200 rpm
Frame Number	N/A 364/365HP
Full Load Efficiency	N/A 94.1 %
Full Load Power Factor	N/A 86.0 %
Full Load Ampere at 460 Volt (V) Voltage	N/A 57.8 A
Down Thrust	N/A 2200 lb
Dimension AG	N/A 36.5 in
Approximate Shipping Weight	N/A 1,215 lb
Enclosure	N/A Totally Enclosed Fan Cooled (286TS - 449T, IP55)
Voltage	N/A 230 V460 V
Phase	N/A Three
Frequency	N/A 50 Hz60 Hz
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Continuous Service Factor for 50 Hertz (Hz) Frequency	N/A 1.0
Ambient Temperature¹	N/A 40 ºC
Elevation²	N/A 3300 ft
Shaft Material	N/A 1045 Carbon Steel

N/A

N/A

CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum
Class F Insulation
Class B Temperature Rise
NEMA Design B Torques
Cast Iron Frame, End Brackets, Fan Cover, Drip Cover and Main Conduit Box
Cast Iron Fan Cover, Drip Cover 280 to 400 Frame, Rolled Steel Fan Cover, Drip Cover 440 Frames
Grounding Terminal Inside Main Conduit Box
Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
Designed for 40ºC Ambient Temperature
Designed for 3300 ft. Elevation
Bi-Directional Rotation
1045 Carbon Steel Shaft, HP Mounting
Aluminum Die Cast Squirrel Cage Rotor Construction
Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
Paint Color: Dark Gray - Munsell 7.5B 3.5/0.5
Guide Bearings: Re-greasable Single Shielded with Mobil PolyrexTM EM
Thrust Bearings: Re-Greasable Angular Contact with Mobil Polyrex™ EM
Automatic Grease Discharge Fittings on Regreasable Models
Double Contact Lip Seal on Both Ends
Cast Iron Inner and Outer Bearing Caps
Stainless Steel Nameplate
Dual Column Design Nameplate as Standard (60/50 Hz)
Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1, Part 31

Motor service factor is 1.0 when operated on a VFD.
Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1 Part 31.

N/A Data subject to change without notice.

¹ Consult a Stock Product Application Specialist for suitability in higher ambient environments.
² Consult a Stock Product Application Specialist for suitability at higher elevations.

Brands