Exit
SearchSearch
1011 Athens Street
Gainesville, GA 30501 USA
Gainesville Industrial Electric
Request Information
AEHH, NEMA Premium
Unit of Measure

Specifications

Shipping Weight

 N/A 845 lb

Brands

 N/A TECO

Power

 N/A 50 hp

Speed

 N/A 1800 rpm

Frame Number

 N/A 326T

Full Load Efficiency

 N/A 87.0 %

Full Load Power Factor

 N/A 94.5 %

Full Load Ampere at 230 Volt (V)

 N/A 56.9 A

Enclosure

 N/A Totally Enclosed Fan-Cooled (IP55)

Voltage

 N/A 460 V

Phase

 N/A Three

Frequency

 N/A 50 Hz60 Hz

Continuous Service Factor for 60 Hertz (Hz) Frequency

 N/A 1.15

Continuous Service Factor for 50 Hertz (Hz) Frequency

 N/A 1.0

Ambient Temperature

 N/A 40 ºC

Elevation

 N/A 3300 ft

Shaft Material

 N/A 1045 Carbon Steel

Certification

 N/A Canadian Standards Association (CSA) ee CC002A Underwriters Laboratories (UL)

Applications

Applications

 N/A
  • Fans and Blowers
  • Compressors
  • Severe Duty / Petro-Chem
  • Pumps
  • Mixers
  • Pulp and Paper Application
  • Crushers
  • Conveyors
  • Marine Duty

Features

Features

 N/A
  • CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum
  • CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Minimum5 (444T and above)
  • IEEE 841 Ready
  • Meets IEEE 45 Marine Duty
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C
  • Cast Iron Frame, End Brackets & Fan Cover and Main Conduit Box
  • Grounding Terminal Inside Main Conduit Box with additional Foot Grounding Provision
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
  • Bi-Directional Rotation
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: 2 Part Epoxy
  • Paint Color: Blue - Munsell 5PB 3/8
  • High Quality Ball (or Roller) Bearings Regreasable with Mobil PolyrexTM EM
  • Automatic Grease Discharge Fittings
  • Rubber Dust Flinger on DE for F# 140T - 280T
  • Oil Seal/V-Ring on Both Ends for F# 320T - 400T
  • Metal Flinger on Both Ends
  • Cast Iron Inner and Outer Bearing Caps for F# 400T and Larger
  • Stainless Steel Nameplate and Hardware
  • Stainless Steel Automatic Breather Drain
  • Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 (Motor service factor is 1.0 when operated on a VFD.)(Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.)
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
  • Motors are U.L. Recognized, CSA Approved
  • 3 Leads Only
  • Dual Drilled Feet Available on Most Ratings - Longer Frames (i.e.145T Drilled also for 143T)
  • Vibration Not to Exceed 0.08 Inches Per Second
  • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded

Note

Note

 N/A Various temp codes apply to ratings. Consult a stock product specialist for accurate code.

575V not offered as stock for this product line.

Data subject to change without notice.
Copyright © 2024 Gainesville Industrial Electric Co., All Rights Reserved   Site created by Thomas Web Solutions and Powered by Navigator Platform