Exit
SearchSearch
1011 Athens Street
Gainesville, GA 30501 USA
Gainesville Industrial Electric
Request Information
AEEHNH, (MAX-VHP™) NEMA Premium
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 40 hp

Speed

 N/A 1800 rpm

Frame Number

 N/A 324TP

Full Load Efficiency

 N/A 94.1 %

Full Load Power Factor

 N/A 86.0 %

Full Load Ampere at 460 Volt (V) Voltage

 N/A 46.3 A

Approximate Shipping Weight

 N/A 720 lb

Down Thrust

 N/A 4,500 lb

Dimension BD

 N/A 16.5 in

Dimension CD

 N/A 27.60 in

Dimension BX

 N/A 1.188 in

Enclosure

 N/A Totally Enclosed Fan Cooled (IP55)

Voltage

 N/A 230 V460 V

Phase

 N/A Three

Service Factor for 60 Hertz (Hz) Frequency on Continuous Sine Wave Power

 N/A 1.15

Ambient Temperature

 N/A 40 ºC

Elevation

 N/A 3300 ft

Shaft Material

 N/A 1045 Hollow Carbon Steel

Applications

Applications

 N/A
  • Deep Well Turbine Pumps
  • Irrigation
  • Water/Wastewater

Features

Features

 N/A
  • Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only
  • 230/460V Motors Suitable for Partial Winding Start (at 230V Only)
  • CSA Certified for Class I, Div. 2, Group B, C, D - Temp Code T3 Minimum
  • Inverter Duty (PWM) per NEMA® MG-1 Part 31 at 1.0 Service Factor
  • Dual Column (60/50 Hz) Design Nameplate as Standard; 50 Hz Data 190/380V at 1.0 S.F.
  • Standard Features: Coupling w/ Gib Key, Non-Sparking Ball Type NRR, Drip/Splash Cover, Space Heaters (120V)
  • 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing
  • CSA Certified for Class I, Div. 2, Groups B,C, D; Temp Code T3 minimum
  • Class F Insulation with Phenolic Alkyd Resin Varnish
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance
  • Cast Iron Conduit Box for F#449TP and Below; Steel Plate Conduit Box for F#5000
  • Counterclockwise (CCW) Rotation; Viewed from Top
  • Cast Iron Frame & End Brackets
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Blue - Munsell 5PB 3/8
  • Guide Bearings: 254 - 286TP frames are Grease Pre-packed Double Shielded Bearings (MULTEMP SRL) 324TP - 5810P frames are Re-Greasable (Mobil Polyrex EM)
  • Thrust Bearings: 254 - 365TP frames are Re-Greasable Angular Contact (Mobil Polyrex EM); 404 - 449TP frames are Oil Lubricated Angular Contact; F#5000 & Above with Spherical Roller or Angular Contact
  • Oil Requirements: 300 S.S.U. @ 100°F
  • Grounding Terminal Inside Main Box
  • Stainless Steel Nameplate
  • 12 Leads (PWS on 230V) on 213 - 405TP; Suitable for Wye/Delta Start at 230V or 460V. 6 Leads on 444TP to 449TP; 5000 Frames and Above with Connection Studs
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 - 4:1 Variable Torque with NRR; 20:1 Variable Torque without NRR Using Braking in VFD
  • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA MG-1 Part 31.

Note

Note

 N/A Suitable for Wye/Delta start at 230V or 460V.
Suitable for Wye/Delta start at 460V.
In order to confirm the TWMC standard coupling size is suitable for customer requirements or to select an alternate coupling size. Required coupling size must be noted on all vertical hollow shaft motors orders. Coupling will be changed out prior to shipping if a non-TW standard coupling size is needed.
Data subject to change without notice.
Copyright © 2024 Gainesville Industrial Electric Co., All Rights Reserved   Site created by Thomas Web Solutions and Powered by Navigator Platform