Item # VHKTP3508, VHTP Series 30 Horsepower (hp), 900 Revolutions Per Minute (rpm), and 364TP Frame NEMA Premium Three Phase TEFC Vertical Hollow Shaft Motor On Gainesville Industrial Electric Co.

All Categories > Electric Motors > Teco-Westinghouse > Vertical Motors > Vertical Hollow Shaft Motors > VHTP Series NEMA Premium, Three Phase, TEFC, Vertical Hollow Shaft Motors > Item # VHKTP3508

Request Information

AEHCNH, NEMA Premium Efficiency (150 HP - 700 HP)

Unit of Measure

Specifications

Brands	N/A TECO
Power	N/A 350 hp
Speed	N/A 900 rpm
Frame Number	N/A 5808P
Full Load Efficiency	N/A 95.0 %
Full Load Power Factor	N/A 77.2 %
Full Load Ampere at 4000 Volt (V) Voltage	N/A 44.5 A
Approximate Shipping Weight	N/A 6,640 lb
Down Thrust	N/A 24,300 lb
Dimension BD	N/A 30.5 in
Dimension CD	N/A 62.09 in
Dimension BX	N/A 2.376 in
Enclosure	N/A Totally Enclosed Fan Cooled (IP54)
Voltage	N/A 2300 V4000 V
Phase	N/A Three
Service Factor for 60 Hertz (Hz) Frequency on Continuous Sine Wave Power	N/A 1.15
Ambient Temperature¹	N/A 40 ºC
Elevation²	N/A 3300 ft
Shaft Material	N/A 1045 Hollow Carbon Steel
Applications	N/A Deep Well Turbine Pumps Irrigation Water/Wastewater
Features	N/A Motors Suitable for Reduced Starting Voltage Three Phase, 60 Hz, 1.15 Service Factor (Continuous on Sine Wave Power) Inverter Duty (PWM) per NEMA® MG-1 Part 31 at 1.0 Service Factor Standard Features: Coupling w/ Gib Key, Non-Sparking Ball Type NRR, Drip/Splash Cover, Space Heaters (120V) 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing CSA Certified for Class I, Div. 2, Groups B,C, D; Temp Code T3 minimum Class F Insulation with VPI Epoxy Resin Varnish Class B Temperature Rise NEMA Design B Torques Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance Steel Plate Conduit Box with Threaded Connection Opening(s) Designed for 40°C Ambient Temperature1 Designed for 3300 ft. Elevation2 Oversized Angular Contact or Spherical Thrust Bearing Installed Counterclockwise (CCW) Rotation; Viewed from Top Cast Iron Frame & End Brackets 1045 Hollow Carbon Steel Shaft Aluminum Die Cast Squirrel Cage Rotor Construction for F#449TP Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000 and Above Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Blue - Munsell 5PB 3/8 Vacuum De-Gassed Re-Greasable Ball Bearings Frames -5007P & Up with Mobil Polyrex™ EM Grease Guide Bearings: 324TP - 5810P Frames are Re-Greasable with Mobil Polyrex™ EM Grease Thrust Bearings: 449TP frames are Oil Lubricated Oversized Angular Contact with Site Glass, 5009 - 5810P Frames are Oil Lubricated Angular Contact or Spherical Thrust Bearing with Site Glass Oil Requirements for 444TP - 5810P Frames: 300 S.S.U. at 100°F Grease Discharge Fittings on Frames with Re-Greasable Motors Bronze Metal Flinger on Lower End Bracket Grounding Terminal Inside Main Box Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Speed Ranges: 10:1 Variable Torque 6 Leads UL Recognized and CSA Approved Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA MG-1. Part 31. Ball Type NRR Provided
Note	N/A Required coupling size must be noted on all vertical hollow shaft motors orders. Coupling will be changed out prior to shipping if a non-TWMC standard coupling size is needed. Data subject to change without notice.

¹ Consult a Stock Product Application Specialist for suitability in higher ambient environments.
² Consult a Stock Product Application Specialist for suitability at higher elevations.

Specifications

Brands

Power

Speed

Frame Number

Full Load Efficiency

Full Load Power Factor

Full Load Ampere at 4000 Volt (V) Voltage

Approximate Shipping Weight

Down Thrust

Dimension BD

Dimension CD

Dimension BX

Enclosure

Voltage

Phase

Service Factor for 60 Hertz (Hz) Frequency on Continuous Sine Wave Power

Shaft Material

Applications

Features

Note