Exit
SearchSearch
1011 Athens Street
Gainesville, GA 30501 USA
Gainesville Industrial Electric
Request Information
AEHCED, NEMA Premium. High Thrust With "P" Base - Medium Voltage.
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 350 hp

Speed

 N/A 1200 rpm

Frame Number

 N/A 5808VP

Full Load Efficiency

 N/A 95.2 %

Full Load Power Factor

 N/A 80.4 %

Full Load Ampere at 4000 Volt (V) Voltage

 N/A 42.5 A

Down Thrust

 N/A 22,300 lb

Dimension BD

 N/A 30.0 in

Approximate Shipping Weight

 N/A 6,060 lb

Enclosure

 N/A Totally Enclosed Fan Cooled (IP55)

Voltage

 N/A 2300 V4000 V

Phase

 N/A Three

Frequency

 N/A 60 Hz

Continuous Service Factor for 60 Hertz (Hz) Frequency

 N/A 1.15
Ambient Temperature1 N/A 40 ºC
Elevation2 N/A 3300 ft

Shaft Material

 N/A 1045 Solid Carbon Steel Shaft

Certification

 N/A Canadian Standards Association (CSA) European Conformity (CE) Fire Safety National Electrical Manufacturers Association (NEMA) Premium Underwriters Laboratories (UR)

Dimension U

 N/A 3.750

Dimension AH

 N/A 8.50

Applications

Applications

 N/A
  • Deep Well Turbine Pumps
  • Irrigation
  • Water/Wastewater

Features

Features

 N/A
  • Inverter Duty (PWM) per NEMA® MG-1 Part 31
  • Standard Features: Non-Sparking Ball Type NRR, Drip/Splash Cover, Space Heaters (120V)
  • 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing
  • CSA Certified for Class I, Div. 2, Groups B, C, D; Temp Code T3 minimum
  • Class F Insulation with VPI Epoxy Resin Varnish
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Fab Steel Plate Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance
  • Steel Plate Conduit Box with Threaded Connection Opening(s)
  • Designed for 40°C Ambient Temperature¹
  • Designed for 3300 ft. Elevation²
  • Oversized Angular Contact or Spherical Thrust Bearing Installed
  • Counterclockwise (CCW) Rotation; Viewed from Top
  • Cast Iron Frame & End Brackets; Steel Plate Fan Cover
  • Aluminum Die Cast Squirrel Cage Rotor Construction for F#449VP and Below
  • Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000 and Above
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Blue - Munsell 5PB 3/8
  • Guide Bearings: Re-Greasable with Mobil Polyrex™ EM Grease
  • Thrust Bearings: Oil Lubricated Angular Contact or Spherical Thrust bearing with Site Glass
  • Oil Requirements: 300 S.S.U. @ 100°F
  • Automatic Grease Discharge Fittings on Frames with Re-Greasable Motors
  • Metal Flinger on Both Ends for Frames 320VP & Up
  • Grounding Terminal Inside Main Box
  • Stainless Steel Nameplate
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
  • Speed Ranges: 10:1 VT, 4:1 CT
  • 6 Leads
  • UL Recognized and CSA Approved
  • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA-MG-1 Part 31

Note

Note

 N/A Data subject to change without notice.
  • 1 Consult a Stock Product Application Specialist for suitability in higher ambient environments.
  • 2 Consult a Stock Product Application Specialist for suitability at higher elevations.
Copyright © 2024 Gainesville Industrial Electric Co., All Rights Reserved   Site created by Thomas Web Solutions and Powered by Navigator Platform