Gainesville Industrial Electric Co. - P Global Series NEMA High Efficiency, Three Phase, Medium Voltage Motors

Unit of Measure

Items	P1002 P Global Series 100 Horsepower (hp), 3600 Revolutions Per Minute (rpm), and 444TS Frame NEMA High Efficiency Medium Voltage Motor	P1004 P Global Series 100 Horsepower (hp), 1800 Revolutions Per Minute (rpm), and 444T Frame NEMA High Efficiency Medium Voltage Motor	P1006 P Global Series 100 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 445T Frame NEMA High Efficiency Medium Voltage Motor	P1006R P Global Series 100 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 445T Frame NEMA High Efficiency Medium Voltage Motor with Drive-End Roller Bearing	P1252 P Global Series 125 Horsepower (hp), 3600 Revolutions Per Minute (rpm), and 444TS Frame NEMA High Efficiency Medium Voltage Motor
Description	N/A Global WPI, ASHA, High Efficiency, Medium Voltage
Brands	N/A TECO
Power	N/A 100 hp	N/A 100 hp	N/A 100 hp	N/A 100 hp	N/A 125 hp
Speed¹	N/A 3600 rpm	N/A 1800 rpm	N/A 1200 rpm	N/A 1200 rpm	N/A 3600 rpm
Frame Number	N/A 444TS	N/A 444T	N/A 445T	N/A 445T	N/A 444TS
Full Load Efficiency	N/A 91.0 %
Full Load Power Factor	N/A 90.2 %	N/A 87.5 %	N/A 80.0 %	N/A 80.0 %	N/A 90.2 %
Full Load Ampere at 2300 Volt (V) Voltage	N/A 22.8 A	N/A 23.5 A	N/A 25.7 A	N/A 25.7 A	N/A 28.5 A
Approximate Shipping Weight	N/A 1,292 lb	N/A 1,680 lb	N/A 2,205 lb	N/A 2,205 lb	N/A 1,370 lb
Enclosure	N/A Weather Protected Type I (WPI), (IP23)
Voltage	N/A 2300 V4160 V
Phase	N/A Three
Frequency	N/A 60 Hz
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Ambient Temperature²	N/A 40 ºC
Elevation³	N/A 3300 ft
Shaft Material	N/A 1045 Carbon Steel
Industry Standards and Approval	N/A Canadian Standards Association (CSA)
Inverter Duty	N/A 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
Applications	N/A Pumps Fans and Blowers Compressors
Features	N/A Standard Features: 100 Ohm Platinum Stator RTD's (2 per Phase), Space Heaters (120V) Class F Insulation Class B Temperature Rise NEMA Design B Torques Oversized Main Conduit Box Rotatable in 90 Degree Increments Fully Gasketed with NPT Threaded Entrance - F1 Mounted Designed for 40°C Ambient Temperature2 Designed for 3300 ft. Elevation3 Rotation: Bi-Directional Except 2 Pole which is Counter-Clockwise (CCW) facing the Drive End Cast Iron Frame and End Brackets 1045 Carbon Steel Shaft Aluminum Die Cast Squirrel Cage Rotor Construction for F#449T and Below Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000 and Above Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5B 3.5/0.5 High Quality Ball (or Roller) Bearings Regreasable with Mobil PolyrexTM EM Insulated Non-Drive End Bearing on 2 Pole Motors; 600 HP and Larger Metal Flinger on Both Ends Cast Iron Inner and Outer Bearing Caps Grounding Terminal Inside Main Box and on Motor Foot Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. An isolation transformer or other method of mitigating common mode voltages from motor terminals must be utilized. Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque) 6 Leads Motors are CSA Approved Spotface 1/4-28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger
Note	N/A Data subject to change without notice. "R" at the end of the Catalog number means motor has Roller Bearing on the Drive End.
¹ Slower speeds available as Made to Order. ² Consult a Stock Product Application Specialist for suitability in higher ambient environments, and for variable and constant torque speed ranges. ³ Consult a Stock Product Application Specialist for suitability at higher elevations.