Gainesville Industrial Electric Co.
Gainesville Industrial Electric Co.
1011 Athens Street
Gainesville, GA 30501

Toll Free: 1-800-457-6210
Local : 770-532-4411
Fax : 770-532-4496
Email: sales@anametelectrical.com
Website: www.gainesvilleindustrial.com
Print Back
ASGHJP/JM, NEMA Premium, Close Coupled, (1 HP - 40 HP)
Three Phase NEMA Premium Rolled Steel Open Drip Proof (ODP) General Purpose Motors
Unit of Measure
Items Three Phase NEMA Premium Rolled Steel Open Drip Proof (ODP) General Purpose Motors
DJMP0014FP
DJMP-FP Series 1 Horsepower (hp), 143/145JM Frame, and 1800 Revolutions Per Minute (rpm) Speed Rolled Steel Open Drip Proof (ODP) General Purpose Motor
Three Phase NEMA Premium Rolled Steel Open Drip Proof (ODP) General Purpose Motors
DJMP0016FP
DJMP-FP Series 1 Horsepower (hp), 143/145JM Frame, and 1200 Revolutions Per Minute (rpm) Speed Rolled Steel Open Drip Proof (ODP) General Purpose Motor
Three Phase NEMA Premium Rolled Steel Open Drip Proof (ODP) General Purpose Motors
DJMP1/52FP
DJMP-FP Series 1.5 Horsepower (hp), 143/145JM Frame, and 3600 Revolutions Per Minute (rpm) Speed Rolled Steel Open Drip Proof (ODP) General Purpose Motor
Three Phase NEMA Premium Rolled Steel Open Drip Proof (ODP) General Purpose Motors
DJMP1/54FP
DJMP-FP Series 1.5 Horsepower (hp), 143/145JM Frame, and 1800 Revolutions Per Minute (rpm) Speed Rolled Steel Open Drip Proof (ODP) General Purpose Motor
Three Phase NEMA Premium Rolled Steel Open Drip Proof (ODP) General Purpose Motors
DJMP1/56FP
DJMP-FP Series 1.5 Horsepower (hp), 182/184JM Frame, and 1200 Revolutions Per Minute (rpm) Speed Rolled Steel Open Drip Proof (ODP) General Purpose Motor
Description N/A ASGHJP/JM, NEMA Premium, Close Coupled, (1 HP - 40 HP)
Brands N/A TECO
Power N/A 1 hp N/A 1 hp N/A 1.5 hp N/A 1.5 hp N/A 1.5 hp
Speed N/A 1800 rpm N/A 1200 rpm N/A 3600 rpm N/A 1800 rpm N/A 1200 rpm
Frame N/A 143/145JM N/A 143/145JM N/A 143/145JM N/A 143/145JM N/A 182/184JM
Full-Load Efficiency N/A 85.5 % N/A 82.5 % N/A 85.5 % N/A 86.5 % N/A 86.5 %
Full-Load Power Factor N/A 75.5 % N/A 66.0 % N/A 83.0 % N/A 80.5 % N/A 54.0 %
Full-Load Ampere at 230 Volt (V) Voltage N/A 2.90 A N/A 3.44 A N/A 3.96 A N/A 4.03 A N/A 6.01 A
Enclosure N/A Open Drip Proof (IP22)
Voltage N/A 230 V460 V
Phase N/A 3
Continuous Service Factor for 60 Hertz (Hz) Frequency N/A 1.15
Continuous Service Factor for 50 Hertz (Hz) Frequency N/A 1.0
Ambient Temperature1 N/A 40 ÂșC
Elevation2 N/A 3300 ft
Approximate Shipping Weight N/A 40 lb N/A 45 lb N/A 40 lb N/A 47 lb N/A 83 lb
Shaft Material N/A 1045 Carbon Steel
Applications N/A
  • Fans & Blowers
  • Pumps
  • HVAC Equipment
  • Compressors
  • Fire Pumps
Features N/A
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Rolled Steel Frame and Main Conduit Box
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Only (F2 not available)
  • Bi-Directional Rotation
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Light Gray - Munsell N5.0
  • Double Shielded Bearings Pre-Packed with MULTEMP SRL (Non-regreasable)
  • Stainless Steel Nameplate
  • Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31.
    • Motor service factor is 1.0 when operated on a VFD.
    • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
  • 9 Leads for 5 HP and Smaller
  • 12 Leads for 7.5 HP and Larger
  • Motors are U.L. Recognized for United States and Canada, CSA Approved and CE Marked
  • Fire Pump available.
  • 1 Consult a Stock Product Application Specialist for suitability in higher ambient environments.
  • 2 Consult a Stock Product Application Specialist for suitability at higher elevations.