Gainesville Industrial Electric Co. - CDP Series MAX-HT™, Severe Duty, NEMA Premium, Three Phase, TEFC Motors

Unit of Measure

Items	CDP0204 MAX-HT™ CDP Series 20 Horsepower (hp), 1800 Revolutions Per Minute (rpm), and 256T Frame Three Phase NEMA Premium TEFC Severe Duty Motor	CDP0206 MAX-HT™ CDP Series 20 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 286T Frame Three Phase NEMA Premium TEFC Severe Duty Motor	CDP0208 MAX-HT™ CDP Series 20 Horsepower (hp), 900 Revolutions Per Minute (rpm), and 324T Frame Three Phase NEMA Premium TEFC Severe Duty Motor	CDP0254 MAX-HT™ CDP Series 25 Horsepower (hp), 1800 Revolutions Per Minute (rpm), and 284T Frame Three Phase NEMA Premium TEFC Severe Duty Motor	CDP0256 MAX-HT™ CDP Series 25 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 324T Frame Three Phase NEMA Premium TEFC Severe Duty Motor
Description	N/A AEHHGD, NEMA Premium, Design C
Brands	N/A TECO
Power	N/A 20 hp	N/A 20 hp	N/A 20 hp	N/A 25 hp	N/A 25 hp
Speed	N/A 1800 rpm	N/A 1200 rpm	N/A 900 rpm	N/A 1800 rpm	N/A 1200 rpm
Frame Number	N/A 256T	N/A 286T	N/A 324T	N/A 284T	N/A 324T
Full Load Efficiency	N/A 93.0 %	N/A 91.7 %	N/A 91.0 %	N/A 93.6 %	N/A 93.0 %
Full Load Power Factor	N/A 86.0 %	N/A 84.0 %	N/A 81.0 %	N/A 86.0 %	N/A 83.0 %
Full Load Ampere at 230 Volt (V)	N/A 23.4 A	N/A 24.3 A	N/A 25.4 A	N/A 29.1 A	N/A 30.3 A
Approximate Shipping Weight	N/A 395 lb	N/A 520 lb	N/A 557 lb	N/A 510 lb	N/A 745 lb
Enclosure	N/A Totally Enclosed Fan Cooled (IP55)
Voltage	N/A 230 V460 V
Phase	N/A Three
Frequency	N/A 50 Hz60 Hz
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Continuous Service Factor for 50 Hertz (Hz) Frequency	N/A 1.0
Ambient Temperature¹	N/A 40 ºC
Elevation²	N/A 3300 ft
Shaft Material	N/A High Strength 4140 AISI Steel Shaft
Certification	N/A Canadian Standards Association (CSA) ee CC002A National Electrical Manufacturers Association (NEMA) Premium Underwriters Laboratories (UL)
Applications	N/A Crushers Ball Mills/Rolling Mills Chippers/Shredders Impactors Any High Torque Application
Features	N/A Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only 575V motors available on a made-to order basis. Consult a Stock Product Application Specialist for details. CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Minimum (Frame 444T and above) Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than 200% Starting Torque / 250% Breakdown Torque Cast Iron Frame, End Brackets, Main Conduit Box; Rolled Steel Fan Cover F# 5000 and with Larger with Pressed Steel Plate Main Conduit Box; CDPxxxRZs have a cast iron box with Grade 8 bolts. Grounding Terminal Inside Main Conduit Box Additional Foot Grounding Provision for F# 440 and Larger. Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5 High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Gamma (Axial Face) Seal on Both Ends for F# 140T - 400T Labyrinth Type Metal Flinger on Both Ends for F# 440T and Larger Cast Iron Inner and Outer Bearing Caps for F# 320T and Larger Stainless Steel Nameplate New Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque) 12 Leads for 125 HP and Smaller 6 Leads for 150 HP and Larger Standard With Thermistors (PTC 140°C) 1 per Phase Locknut and Washer on NDE for Vertical Shaft Down Applications on F# 440 and Larger Drain Holes / Plugs on Both End Brackets for Vertical Applications Threaded One Way Breather Drains for Horizontal Mount Applications Spotface 1/4 -28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger	N/A Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only 575V motors available on a made-to order basis. Consult a Stock Product Application Specialist for details. CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Minimum (Frame 444T and above) Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than 200% Starting Torque / 250% Breakdown Torque Cast Iron Frame, End Brackets, Main Conduit Box; Rolled Steel Fan Cover F# 5000 and with Larger with Pressed Steel Plate Main Conduit Box; CDPxxxRZs have a cast iron box with Grade 8 bolts. Grounding Terminal Inside Main Conduit Box Additional Foot Grounding Provision for F# 440 and Larger. Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5 High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Gamma (Axial Face) Seal on Both Ends for F# 140T - 400T Labyrinth Type Metal Flinger on Both Ends for F# 440T and Larger Cast Iron Inner and Outer Bearing Caps for F# 320T and Larger Stainless Steel Nameplate New Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque) 12 Leads for 125 HP and Smaller 6 Leads for 150 HP and Larger Standard With Thermistors (PTC 140°C) 1 per Phase Locknut and Washer on NDE for Vertical Shaft Down Applications on F# 440 and Larger Drain Holes / Plugs on Both End Brackets for Vertical Applications Threaded One Way Breather Drains for Horizontal Mount Applications Spotface 1/4 -28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger	N/A Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only 575V motors available on a made-to order basis. Consult a Stock Product Application Specialist for details. CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Minimum (Frame 444T and above) Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than 200% Starting Torque / 250% Breakdown Torque Cast Iron Frame, End Brackets, Main Conduit Box; Rolled Steel Fan Cover F# 5000 and with Larger with Pressed Steel Plate Main Conduit Box; CDPxxxRZs have a cast iron box with Grade 8 bolts. Grounding Terminal Inside Main Conduit Box Additional Foot Grounding Provision for F# 440 and Larger. Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5 High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Gamma (Axial Face) Seal on Both Ends for F# 140T - 400T Labyrinth Type Metal Flinger on Both Ends for F# 440T and Larger Cast Iron Inner and Outer Bearing Caps for F# 320T and Larger Stainless Steel Nameplate New Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque) 12 Leads for 125 HP and Smaller 6 Leads for 150 HP and Larger Standard With Thermistors (PTC 140°C) 1 per Phase Locknut and Washer on NDE for Vertical Shaft Down Applications on F# 440 and Larger Drain Holes / Plugs on Both End Brackets for Vertical Applications Threaded One Way Breather Drains for Horizontal Mount Applications Spotface 1/4 -28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger	N/A Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only 575V motors available on a made-to order basis. Consult a Stock Product Application Specialist for details. CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Minimum (Frame 444T and above) Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than 200% Starting Torque / 250% Breakdown Torque Cast Iron Frame, End Brackets, Main Conduit Box; Rolled Steel Fan Cover F# 5000 and with Larger with Pressed Steel Plate Main Conduit Box; CDPxxxRZs have a cast iron box with Grade 8 bolts. Grounding Terminal Inside Main Conduit Box Additional Foot Grounding Provision for F# 440 and Larger. Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5 High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Gamma (Axial Face) Seal on Both Ends for F# 140T - 400T Labyrinth Type Metal Flinger on Both Ends for F# 440T and Larger Cast Iron Inner and Outer Bearing Caps for F# 320T and Larger Stainless Steel Nameplate New Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque) 12 Leads for 125 HP and Smaller 6 Leads for 150 HP and Larger Standard With Thermistors (PTC 140°C) 1 per Phase Locknut and Washer on NDE for Vertical Shaft Down Applications on F# 440 and Larger Drain Holes / Plugs on Both End Brackets for Vertical Applications Threaded One Way Breather Drains for Horizontal Mount Applications Spotface 1/4 -28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger	N/A Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only 575V motors available on a made-to order basis. Consult a Stock Product Application Specialist for details. CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Minimum (Frame 444T and above) Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than 200% Starting Torque / 250% Breakdown Torque Cast Iron Frame, End Brackets, Main Conduit Box; Rolled Steel Fan Cover F# 5000 and with Larger with Pressed Steel Plate Main Conduit Box; CDPxxxRZs have a cast iron box with Grade 8 bolts. Grounding Terminal Inside Main Conduit Box Additional Foot Grounding Provision for F# 440 and Larger. Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5 High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Gamma (Axial Face) Seal on Both Ends for F# 140T - 400T Labyrinth Type Metal Flinger on Both Ends for F# 440T and Larger Cast Iron Inner and Outer Bearing Caps for F# 320T and Larger Stainless Steel Nameplate New Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque) 12 Leads for 125 HP and Smaller 6 Leads for 150 HP and Larger Standard With Thermistors (PTC 140°C) 1 per Phase Locknut and Washer on NDE for Vertical Shaft Down Applications on F# 440 and Larger Drain Holes / Plugs on Both End Brackets for Vertical Applications Threaded One Way Breather Drains for Horizontal Mount Applications Spotface 1/4 -28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger
Note	N/A AEHHGD "CDP" motors replace AEEAGD "CD" motor line in compliance to new DOE standards. Data subject to change without notice.
¹ Consult a Stock Product Application Specialist for suitability in higher ambient environments. ² Consult a Stock Product Application Specialist for suitability at higher elevations.