Gainesville Industrial Electric Co.
Gainesville Industrial Electric Co.
1011 Athens Street
Gainesville, GA 30501

Toll Free: 1-800-457-6210
Local : 770-532-4411
Fax : 770-532-4496
Email: sales@anametelectrical.com
Website: www.gainesvilleindustrial.com
Print Back
DVEM, Permanent Magnet Synchronous Motor, TEFC (PM)
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 1.5 hp

Speed

 N/A 3600 rpm

Frame Number

 N/A 143T

Full Load Efficiency

 N/A 85.2 %

Induced Voltage Constant

 N/A 91.0 V/krpm

Full Load Ampere at 460 Volt (V) Voltage

 N/A 2.20 A

Approximate Shipping Weight

 N/A 37 lb

Enclosure

 N/A Totally Enclosed Fan-Cooled (IP55)

Voltage

 N/A 230 V460 V

Phase

 N/A Three

Frequency

 N/A 60 Hz

Continuous Service Factor

 N/A 1.0
Ambient Temperature1 N/A 40 ºC
Elevation2 N/A 3300 ft

Shaft Material

 N/A 1045 Carbon Steel

Applications

Applications

 N/A
  • Pumps
  • Fans
  • Grinders

Features

Features

 N/A
  • Class F Insulation
  • Class B Temperature Rise
  • IE4 Efficiency Level
  • Rolled Steel Fan Cover, and Main Conduit Box Rotatable in 90 Degree Increments
  • Cast Iron Frame, End Brackets
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box - F1 Mounted, F2 Convertible.
  • Designed for 40ºC Ambient Temperature
  • Designed for 3300 ft. Elevation
  • Bi-Directional Rotation
  • Permanent Magnet Rotor Construction (NdFeB)
  • Double Shielded Bearings Pre-Packed with MULTEMP SRL
  • Stainless Steel Nameplate
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Green - Munsell 10GY 5/12
  • Method of Starting: Controlled by Permanent Magnet Synchronous Motor Drive
  • Over Torque: 150% Rated Torque for 60 Seconds
  • 9 Leads
  • Two Drain Holes on Bottom of Frame
  • Motors are cCSAus Approved, and CE Marked

Note

Note

 N/A Select catalog numbers have changed in order to follow the following format:

Data subject to change without notice.
  • 1 Consult a Stock Product Application Specialist for suitability in higher ambient environments.
  • 2 Consult a Stock Product Application Specialist for suitability at higher elevations.