Gainesville Industrial Electric Co.
Gainesville Industrial Electric Co.
1011 Athens Street
Gainesville, GA 30501

Toll Free: 1-800-457-6210
Local : 770-532-4411
Fax : 770-532-4496
Email: sales@anametelectrical.com
Website: www.gainesvilleindustrial.com
Print Back
AEHESY, High Efficiency
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 800 hp

Speed

 N/A 1800 rpm

Frame

 N/A 5810UZ

Full Load Efficiency

 N/A 95.6 %

Full Load Power Factor

 N/A 90.5 %

Full Load Ampere at 460 Volt (V) Voltage

 N/A 866 A

Shaft Diameter

 N/A 5.750 in

Approximate Shipping Weight

 N/A 7,800 lb

Enclosure

 N/A Totally Enclosed Fan Cooled (IP55)

Voltage

 N/A 460 V

Phase

 N/A Three

Frequency

 N/A 50 Hz60 Hz

Continuous Service Factor for 60 Hertz (Hz) Frequency

 N/A 1.15

Continuous Service Factor for 50 Hertz (Hz)

 N/A 1.0
Ambient Temperature1 N/A 40 ºC
Elevation2 N/A 3300 ft

Shaft Material

 N/A 4140 SCM Carbon Steel

Applications

Applications

 N/A
  • Fans and Blowers
  • Compressors
  • Any Severe Duty/ Petro-Chem/Pulp & Paper Application
  • Pumps
  • Mixers

Features

Features

 N/A
  • CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum
    • CSA Certification for Hazardous Locations only applies to select ratings. See product page for select details.
  • CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Minimum
    • CSA Certification for Hazardous Locations only applies to select ratings. See product page for select details.
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Cast Iron Frame, End Brackets & Fan Cover and Main Conduit Box
    • F# 5000 and Larger with Pressed Steel Plate Main Conduit Box.
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
  • Designed for 40ºC Ambient Temperature
  • Designed for 3300 ft. Elevation
  • Bi-Directional Rotation
  • 4140 SCM Carbon Steel Shaft-Keyless
  • Aluminum Die Cast Squirrel Cage Rotor Construction or Copper/Copper Alloy Rotor Construction.
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Light Gray - Munsell N5.0
  • High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM
  • Automatic Grease Discharge Fittings
  • Metal Flinger on Both Ends
  • Cast Iron Inner and Outer Bearing Caps
  • Stainless Steel Nameplate
  • Dual Column Design Nameplate as Standard (60/50 Hz) on the 449 Frames and below
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
    • Motor service factor is 1.0 when operated on a VFD.
    • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
  • 6 Leads
  • Motors are U.L. Recognized, CSA Approved
  • Provisions for Bearing RTDs, both End Brackets Pre-Drilled and Plugged; F#5000 and Larger Only
  • Spotface 1/4-28UNF Tap x 12 mm Deep on Top of Both End Brackets with VB300 Vibration Sensor

Note

Note

 N/A
  • Noted ratings CSA Certified for Hazardous Locations Class 1 Div 2.
  • Noted ratings with Copper/Copper Alloy Rotor Construction.
  • Data subject to change without notice.
  • 1 Consult a Stock Product Application Specialist for suitability in higher ambient environments.
  • 2 Consult a Stock Product Application Specialist for suitability at higher elevations.