Gainesville Industrial Electric Co.
Gainesville Industrial Electric Co.
1011 Athens Street
Gainesville, GA 30501

Toll Free: 1-800-457-6210
Local : 770-532-4411
Fax : 770-532-4496
Email: sales@anametelectrical.com
Website: www.gainesvilleindustrial.com
Print Back
AEUH8NDP, NEMA Premium, Round Body
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 40 hp

Speed

 N/A 1200 rpm

Frame Number

 N/A 364/365HP

Full Load Efficiency

 N/A 94.1 %

Full Load Power Factor

 N/A 86.5 %

Full Load Ampere at 460 Volt (V) Voltage

 N/A 46.0 A

Down Thrust

 N/A 2200 lb

Dimension AG

 N/A 34.1 in

Approximate Shipping Weight

 N/A 1,078 lb

Enclosure

 N/A Totally Enclosed Fan Cooled (286TS - 449T, IP55)

Voltage

 N/A 230 V460 V

Phase

 N/A Three

Frequency

 N/A 50 Hz60 Hz

Continuous Service Factor for 60 Hertz (Hz) Frequency

 N/A 1.15

Continuous Service Factor for 50 Hertz (Hz) Frequency

 N/A 1.0
Ambient Temperature1 N/A 40 ºC
Elevation2 N/A 3300 ft

Shaft Material

 N/A 1045 Carbon Steel

Applications

Applications

 N/A
  • Centrifugal Pumps
  • Petro-Chemical
  • Water/ Wastewater
  • Pulp and Paper

Features

Features

 N/A
  • Voltage: 230/460V (Usable on 208V)
    • Motors 7.5 HP & up are Suitable for Wye/Delta Starting.
  • CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Cast Iron Frame, End Brackets, Fan Cover, Drip Cover and Main Conduit Box
  • Cast Iron Fan Cover, Drip Cover 280 to 400 Frame, Rolled Steel Fan Cover, Drip Cover 440 Frames
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
  • Designed for 40ºC Ambient Temperature
  • Designed for 3300 ft. Elevation
  • Bi-Directional Rotation
  • 1045 Carbon Steel Shaft, HP Mounting
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Dark Gray - Munsell 7.5B 3.5/0.5
  • Guide Bearings: Re-greasable Single Shielded with Mobil PolyrexTM EM
  • Thrust Bearings: Re-Greasable Angular Contact with Mobil Polyrex™ EM
  • Automatic Grease Discharge Fittings on Regreasable Models
  • Double Contact Lip Seal on Both Ends
  • Cast Iron Inner and Outer Bearing Caps
  • Stainless Steel Nameplate
  • Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1, Part 31
    • Motor service factor is 1.0 when operated on a VFD.
    • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1 Part 31.
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
  • Motors are c U.L. us, c CSA us Approved
  • 12 Leads on Motors up to 125HP, 6 Leads on 150HP and Larger
  • NEMA Type P Base and HP Shaft

Note

Note

 N/A Data subject to change without notice.
  • 1 Consult a Stock Product Application Specialist for suitability in higher ambient environments.
  • 2 Consult a Stock Product Application Specialist for suitability at higher elevations.