Gainesville Industrial Electric Co.
Gainesville Industrial Electric Co.
1011 Athens Street
Gainesville, GA 30501

Toll Free: 1-800-457-6210
Local : 770-532-4411
Fax : 770-532-4496
Email: sales@anametelectrical.com
Website: www.gainesvilleindustrial.com
Print Back
AMRCFP, (MAX-VHP™) High Efficiency Fire Pump
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 150 hp

Speed

 N/A 1800 rpm

Frame Number

 N/A 444TP

Full Load Efficiency

 N/A 95.0 %

Full Load Power Factor

 N/A 86.0 %

Full Load Ampere at 460 Volt (V) Voltage

 N/A 172 A

Approximate Shipping Weight

 N/A 1,815 lb

Down Thrust

 N/A 10,700 lb

Dimension BD

 N/A 16.5 in

Dimension CD

 N/A 44.78 in

Dimension BX

 N/A 1.501 in

Enclosure

 N/A Weather Protected Type I (WPI)

Voltage

 N/A 230 V460 V

Phase

 N/A Three

Service Factor for 60 Hertz (Hz) Frequency on Continuous Sine Wave Power

 N/A 1.15

Ambient Temperature

 N/A 40 ºC

Elevation

 N/A 3300 ft

Shaft Material

 N/A 1045 Hollow Carbon Steel

Applications

Applications

 N/A
  • Deep Well Turbine Pumps
  • Irrigation
  • Fire Pumps
  • Fluid Handling Systems
  • Water/ Waste Water

Features

Features

 N/A
  • Inverter Duty (PWM) per NEMA® MG-1 Part 31 at 1.0 Service Factor
  • Dual Column (60/50 Hz) Design Nameplate as Standard; 50 Hz Data 190/380V at 1.0 S.F.
  • Standard Features: Coupling w/ Gib Key, Ball Type NRR, Drip/Splash Cover, Space Heaters (120V)
  • 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing
  • Optional Capability for 175% High Thrust Requirement for 444 - 449TP Frames
  • Motor Design Suitable to handle 2 stacked bearings; Motors will ship with 1 bearing and 1 spacer as Standard
    • Fire Pump available.
    Class F Insulation with Phenolic Alkyd Resin Varnish
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance
  • Cast Iron Conduit Box for F#449TP and Below; Steel Plate Conduit Box for F#5000
  • Counterclockwise (CCW) Rotation; Viewed from Top
  • Cast Iron Frame & End Brackets
  • Aluminum Die Cast Squirrel Cage Rotor Construction for F#449TP and Below
  • Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color for AMRC (MAX-VH™): Dark Gray - Munsell 7.5B 3.5/0.5
  • Paint Color for AMRCNH (MAX-VHP™): Blue - Munsell 5PB 3/8
  • Guide Bearings: 213 - 286TP frames are Grease Pre-packed Double Shielded Bearings (MULTEMP SRL) 324TP - 5009P frames are Re-Greasable (Mobil Polyrex EM)
  • Thrust Bearings: 213 - 286TP frames are Re-Greasable Angular Contact (Mobil Polyrex EM); 324 - 449TP frames are Oil Lubricated Angular Contact; F#5000 and Above with Spherical Roller
  • Oil Sight Glass for 324TP Frames and Above
  • Oil Requirements: 300 S.S.U. @100°F
  • Grounding Terminal Inside Main Box
  • Stainless Steel Nameplate and Rodent Screens
  • 12 Leads (PWS on 230V), Wye/Delta on 230/460V for 210TP-400TP
  • 6 Leads (PWS on 230V, Wye D on 460V for 444TP-5810P)
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
  • 10:1 Variable Torque with NRR. 10:1 C.T., 20:1 VT without NRR Using Braking in VFD
  • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD at stated per NEMA MG-1, part 31 for AMRCNH and Part 30 for AMRC.

Note

Note

 N/A Fire Pump available as made to order. Fire Pump Certificate complies with ANSI/UL 1004-5. Certificate# 20120717 - EX6569.
Delivery for Fire Pump Duty motor (Catalog Number + FP) is standard 5 - 10 working days after receipt of order if standard motor is in stock; Painting to Fire Safety Red requirement on Fire Pump Duty type motor can be waived in order to expedite delivery upon request.
Fire Pump Duty Motor pricing includes: adding UL nameplate, restamping original nameplate to new "VHP_FP" catalog number, and Fire Safety Red Paint.
In order to confirm the TWMC standard coupling size is suitable for customer requirements or to select an alternate coupling size Required coupling size must be noted on all vertical hollow shaft motors orders. Coupling will be changed out prior to shipping if a non-TWMC standard coupling size is needed. Data subject to change without notice.