Gainesville Industrial Electric Co.
Gainesville Industrial Electric Co.
1011 Athens Street
Gainesville, GA 30501

Toll Free: 1-800-457-6210
Local : 770-532-4411
Fax : 770-532-4496
Email: sales@anametelectrical.com
Website: www.gainesvilleindustrial.com
Print Back
AMRKNH, Premium Efficiency
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 400 hp

Speed

 N/A 1800 rpm

Frame Number

 N/A 5009VP

Full Load Efficiency

 N/A 95.0 %

Full Load Power Factor

 N/A 86.8 %

Full Load Ampere at 460 Volt (V) Voltage

 N/A 45.5 A

Approximate Shipping Weight

 N/A 3,710 lb

Down Thrust

 N/A 30,900 lb

Dimension BD

 N/A 24.5 in

Dimension CD

 N/A 57.06 in

Dimension BX

 N/A 2.188 in

Enclosure

 N/A Weather Protected Type I (WPI)

Voltage

 N/A 2300 V4000 V

Phase

 N/A Three

Service Factor for 60 Hertz (Hz) Frequency on Continuous Sine Wave Power

 N/A 1.15

Ambient Temperature

 N/A 40 ºC

Elevation

 N/A 3300 ft

Shaft Material

 N/A 1045 Hollow Carbon Steel

Applications

Applications

 N/A
  • Deep Well Turbine Pumps
  • Irrigation
  • Water/Wastewater

Features

Features

 N/A
  • Inverter Duty (PWM) per NEMA® MG-1 Part 31 at 1.0 Service Factor
  • Standard Features: Coupling w/ Gib Key, Ball Type NRR, Drip/Splash Cover, Space Heaters (120V)
  • 5000 Frames and Above also include Mounting Provisions for bearing RTDs and Insulated Bearing Housing
  • Class F Insulation with VPI Epoxy Resin Varnish
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance
  • Cast Iron Conduit Box for F#449TP and Below; Steel Plate Conduit Box for F#5000
  • Counterclockwise (CCW) Rotation; Viewed from Top
  • Cast Iron Frame & End Brackets
  • Aluminum Die Cast Squirrel Cage Rotor Construction for F#449TP and Below, 4pole; 6-8 pole copper fabricated rotor
  • Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000 and above
  • Paint System: Paint System Epoxy Base Coat Plus Polyurethane Top Cover
  • Paint Color: Blue - Munsell 5PB 3/8
  • Guide Bearings: Re-Greasable with Mobil Polyrex™ EM Grease
  • Thrust Bearings: 449TP frames are Oil Lubricated Oversized Angular Contact with Site Glass
  • Thrust Bearings: 5000 Frame and above are Oil Lubricated Spherical Roller with Site Glass
  • Oil Requirements: 300 S.S.U. @100°F
  • Grounding Terminal Inside Main Box
  • Stainless Steel Nameplate
  • 6 Leads
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 - 10:1 Variable Torque with NRR; 20:1 Variable Torque without NRR Using Braking in VFD
  • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA MG-1. Part 31.

Note

Note

 N/A In order to confirm the TWMC standard coupling size is suitable for customer requirements or to select an alternate coupling size. Required coupling size must be noted on all vertical hollow shaft motors orders. Coupling will be changed out prior to shipping if a non-TWMC standard coupling size is needed.
Data subject to change without notice.