Gainesville Industrial Electric Co.
Gainesville Industrial Electric Co.
1011 Athens Street
Gainesville, GA 30501

Toll Free: 1-800-457-6210
Local : 770-532-4411
Fax : 770-532-4496
Email: sales@anametelectrical.com
Website: www.gainesvilleindustrial.com
Print Back
AMRKED, Premium Efficiency
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 400 hp

Speed

 N/A 1200 rpm

Frame Number

 N/A 5009VP

Full Load Efficiency

 N/A 95.0 %

Full Load Power Factor

 N/A 75.6 %

Full Load Ampere at 230 Volt (V)

 N/A 52.0 A

Down Thrust

 N/A 33,800 lb

Dimension BD

 N/A 24.5 in

Approximate Shipping Weight

 N/A 4,190 lb

Enclosure

 N/A Weather Protected Type I (WPI)

Voltage

 N/A 2300 V4000 V

Phase

 N/A Three

Frequency

 N/A 60 Hz

Continuous Service Factor for 60 Hertz (Hz) Frequency

 N/A 1.15
Ambient Temperature1 N/A 40 ºC
Elevation2 N/A 3300 ft

Shaft Material

 N/A 1045 Solid Carbon Steel Shaft

Certification

 N/A Canadian Standards Association (CSA) European Conformity (CE) Fire Safety National Electrical Manufacturers Association (NEMA) Premium Underwriters Laboratories (UR)

Dimension U

 N/A 3.375 in

Dimension AH

 N/A 6.00 in

Applications

Applications

 N/A
  • Deep Well Turbine Pumps
  • Irrigation
  • Water/Wastewater

Features

Features

 N/A
  • Inverter Duty (PWM) per NEMA® MG-1 Part 31
  • Standard Features: Ball Type NRR, Drip/Splash Cover, Space Heaters (120V)
  • 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing
  • Class F Insulation with VPI Epoxy Resin Varnish
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT
  • Threaded Entrance
  • Steel Plate Conduit Box for F#449-5800
  • Counterclockwise (CCW) Rotation; Viewed from Top
  • Cast Iron Frame & End Brackets
  • Aluminum Die Cast Squirrel Cage Rotor Construction for F#449TP and Below 4pole; 6-8 pole copper fabricated rotor
  • Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000
  • Paint System: Paint System Epoxy Base Coat Plus Polyurethane Top Cover
  • Paint Color: Blue - Munsell 5PB 3/8
  • Guide Bearings: 449VP - 5810VP Frames are Re-Greasable with Mobil Polyrex™ EM Grease
  • Thrust Bearings: 449VP - 5810VP Frames are Oil Lubricated Angular Contact or Spherical Thrust Bearing with Site Glass
  • Oil Requirements for 444VP - 5810VP Frames: 300 S.S.U. @ 100ºF
  • Grease Discharge Fittings on Frames with Re-Greasable Motors
  • Metal Flinger on Lower End Bracket
  • Grounding Terminal Inside Main Box
  • Stainless Steel Nameplate
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
  • Speed Ranges: 10:1 VT, 4:1 CT
  • 6 Leads
  • UL Recognized and CSA Approved
  • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD
  • as stated per NEMA MG-1 Part 31.
  • Ball Type NRR Provided

Note

Note

 N/A Data subject to change without notice.
  • 1 Consult a Stock Product Application Specialist for suitability in higher ambient environments.
  • 2 Consult a Stock Product Application Specialist for suitability at higher elevations.