3NC Series
Franklin Electric’s 3NC Series Non-Clog pumps are designed to handle the absolute most demanding commercial or industrial applications and are backed by Franklin’s long standing reputation for quality.
Applications
Used for a multitude of purposes in commercial and industrial applications such as: sewage, effluent, irrigation, and general de-watering
Features
Dual Mechanical Seals: Silicon carbide vs. silicon carbide lower seal and silicon carbide vs. silicon carbide upper seal with additional exclusion seal.
Impeller: Ductile iron, two vane semi-open, balanced, non-clogging with pump-out vanes to protect the mechanical seal and assist with thrust loading.
Seal Sensor Probe: Integrated into the seal-fail detection chamber, it will send a signal to the pump control panel indicating that a fault has occurred and the pump should be removed for service.
Motor: The motor was designed for continuous operation when pump is fully submerged (104 ºF maximum) and boasts Class F insulation.
Wear Plate: Wear plate is field adjustable, eliminating the need for a replaceable wear ring.
Specifications
3" horizontal flange discharge (125# ANSI flange)
Maximum solids size: 2.5"
Power cable - 8/4 -type SOOW - 30'
Sensor cable - 16/4 - type SOOW - 30’
Class F motor insulation
Continuous duty motor (104 ºF maximum)
Lower double row ball bearing
300 series SST motor shaft
Seal-fail indication probe
300 series SST fasteners
Cast iron motor housing, volute, and seal chamber
Fluoroelastomer (FKM) sealing system for motor enclosure
Mechanical seals: Dual silicon carbide
Additional exclusion seal
Agency listing: cCSAus
Franklin Electric’s 3NC Series Non-Clog pumps are designed to handle the absolute most demanding commercial or industrial applications and are backed by Franklin’s long standing reputation for quality.
Applications
Used for a multitude of purposes in commercial and industrial applications such as: sewage, effluent, irrigation, and general de-watering
Features
Dual Mechanical Seals: Silicon carbide vs. silicon carbide lower seal and silicon carbide vs. silicon carbide upper seal with additional exclusion seal.
Impeller: Ductile iron, two vane semi-open, balanced, non-clogging with pump-out vanes to protect the mechanical seal and assist with thrust loading.
Seal Sensor Probe: Integrated into the seal-fail detection chamber, it will send a signal to the pump control panel indicating that a fault has occurred and the pump should be removed for service.
Motor: The motor was designed for continuous operation when pump is fully submerged (104 ºF maximum) and boasts Class F insulation.
Wear Plate: Wear plate is field adjustable, eliminating the need for a replaceable wear ring.
Specifications
3" horizontal flange discharge (125# ANSI flange)
Maximum solids size: 2.5"
Power cable - 8/4 -type SOOW - 30'
Sensor cable - 16/4 - type SOOW - 30’
Class F motor insulation
Continuous duty motor (104 ºF maximum)
Lower double row ball bearing
300 series SST motor shaft
Seal-fail indication probe
300 series SST fasteners
Cast iron motor housing, volute, and seal chamber
Fluoroelastomer (FKM) sealing system for motor enclosure
Mechanical seals: Dual silicon carbide
Additional exclusion seal
Agency listing: cCSAus
