Exit
1011 Athens Street
Gainesville, GA 30501 USA
Gainesville Industrial Electric
For extreme applications in the process industries such as chemical plants, pulp and paper mills, food processing, foundries, refineries, mines, and other severe duty environments where medium voltage power is available. All ratings are available in 5800 frames.
Unit of Measure

Category

N/A Medium Voltage

Manufacturer

N/A Marathon Electric

Motor Type

N/A 5000 Frame, Medium Voltage, 2300/4000 Volt, Blue Chip XRI® Severe Duty

Style

N/A Totally Enclosed, Rigid Base

RPM

N/A 900 rpm

Voltage

N/A 2300 volts4000 volts

Nominal Efficiency

N/A 95.8

Multiplier Symbol

N/A S6

Service Factor

N/A 1.15

Frame

N/A 5013LS

Full Load Ampere (FLA)

N/A 101 amps58.0 amps

Dim. - "C"

N/A 76.19

Stock Model

N/A No

Horsepower

N/A 400

Phase

N/A 3

N/A Chemical Plants
Pulp and Paper Mills
Food Processing
Foundries
Refineries
Mines
Others Severe Duty Environments

N/A

  • Blue Chip® quality, cast iron construction for rigidity and reduced vibration.
  • Open Conrad radial ball bearings rated at 100,000 hour B-10 life on direct coupled-loads.
  • Grease fittings with extended grease tubes.
  • Oversized cast iron conduit box.
  • Epoxy 100% solids. Vacuum Pressure Impregnation (VPI) resin.
  • 1.15 Service factor.
  • Front and rear cast iron bearing caps.
  • Provisions for jacking bolts in all four feet.
  • Actual test and vibration data included with each motor.
  • Class H insulation. Form wound coils.
  • Internal and external epoxy finish.
  • Rotating shaft seals, Inpro® Smart Rings on each end.
  • Provisions for dowel pins in drive end feet.
  • Ground provisions on foot and in the conduit box.

N/A Prices and specifications are subject to change without notice. Prices and specifications are subject to change without notice. Prices and specifications are subject to change without notice.|Prices and specifications are subject to change without notice.