Exit
SearchSearch
1011 Athens Street
Gainesville, GA 30501 USA
Gainesville Industrial Electric
Request Information
AEHGTK, TEFC, NEMA, Premium Efficiency, Medium Voltage
Unit of Measure

Specifications

Brands

 N/A TECO

Power

 N/A 125 hp

Speed

 N/A 900 rpm

Frame Number

 N/A 447/9T

Full Load Efficiency

 N/A 94.7 %

Full Load Power Factor

 N/A 77.0 %

Full Load Ampere at 460 Volt (V) Voltage

 N/A 32.1 A

Approximate Shipping Weight

 N/A 2,835 lb

Enclosure

 N/A Totally Enclosed Fan Cooled (IP55)

Voltage

 N/A 2300 V4160 V

Phase

 N/A Three

Continuous Service Factor for 60 Hertz (Hz) Frequency

 N/A 1.15
Ambient Temperature1 N/A 40 ºC
Elevation2 N/A 3300 ft

Frequency

 N/A 60 Hz

Inverter Duty

 N/A 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)

Industry Standards and Approval

 N/A Canadian Standards Association (CSA) NEMA Premium

Shaft Material

 N/A 1045 Carbon Steel

Applications

Applications

 N/A
  • Pumps
  • Fans and Blowers
  • Compressors
  • Mills
  • Grinders

Features

Features

 N/A
  • CSA Certified for Class I, Div. 2, for 5000 Frames and above, at 1.15 Service Factor is temperature coded: T3 (125 to 400 HP); T2D (401 to 800 HP); T2B (801 to 900 HP); and at 1.0 Service Factor is T3 only.
  • CSA Certified for Class 1, Div. 2, Groups B, C, and D, for 444 Frames and above, Code T35
  • Standard Features: 100 Ohm Platinum Stator RTD's (2/Phase), Space Heaters (120V)
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments fully Gasketed with NPT Threaded Entrance - F1 Mounted
  • Cast Iron Terminal Box on 444T - 449T Frames
  • Steel Plate Terminal Box on 5000 Frames and Above
  • Bi-Directional Rotation for all 444T - 449T Frames and for 1800 - 900RPM (4 - 8 Pole) 5007 - 6808 Frame Motors and for (4-8 Pole) 5007-6808 Frame Motors
  • 5007 - 6808 Frame 3600RPM (2 Pole) Motors have Counter-Clockwise (CCW) Rotation facing the Drive End
  • Cast Iron Frame and End Brackets
  • Aluminum Die Cast Squirrel Cage Rotor Construction on 444T - 449T Frames
  • Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for on 5007 - 6808 Frames
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Dark Gray - Munsell 7.5B 3.5/0.5
  • High Quality Ball (or Roller) Bearings Regreasable with Mobil PolyrexTM EM
  • Metal Flinger on Both Ends
  • Cast Iron Inner and Outer Bearing Caps
  • Grounding Terminal Inside Main Box and on Motor Foot
  • Stainless Steel Nameplate
  • 6 Leads, with Solderless Lug Terminals
  • Motors are CSA Approved
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
    • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. An isolation transformer or other method of mitigating common mode voltages from motor terminals must be utilized.
    • Consult Stock Product Specialist for various temp codes on which ratings.
  • 2-Pole motors, 600HP and larger, are Form Wound and Insulated Non-Drive End Bearing
  • Spotface 1/4 -28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger

Note

Note

 N/A Insulated non-drive end bearing as standard on 2 pole motors 400 HP and larger. Motors are unidirectional, with counter clockwise rotation, facing the drive end, to change please consult factory.
Data subject to change without notice.
Motor service factor is 1.0 when operated on a VFD.
  • 1 Consult a Stock Product Application Specialist for suitability in higher ambient environments, and for variable and constant torque speed ranges.
  • 2 Consult a Stock Product Application Specialist for suitability at higher elevations.
Copyright © Gainesville Industrial Electric Co., All Rights Reserved   Site created by Thomas Web Solutions and Powered by Navigator Platform