Item # WPV1/52C, WPV Series 1.5 Horsepower (hp), 3600 Revolutions Per Minute (rpm), and 143/145TC Frame Three Phase NEMA Premium Round Body C-Face TEFC Stainless Steel Washdown Severe Duty Motor On Gainesville Industrial Electric Co.

Request Information

AEGP, NEMA Premium, TEFC

Unit of Measure

Specifications | Applications | Features | Note

Brands	N/A TECO
Power	N/A 1.5 hp
Speed	N/A 3600 rpm
Frame Number	N/A 143/145TC
Full Load Efficiency	N/A 84.0 %
Full Load Power Factor	N/A 90.0 %
Full Load Ampere at 230 Volt (V)	N/A 2.00 A
Approximate Shipping Weight	N/A 50 lb
Enclosure	N/A Total Enclosed Non-Ventilated (IP66) (IEEE45) Totally Enclosed Fan Cooled (IP66) (IEEE 45)
Voltage	N/A 230 V460 V
Phase	N/A Three
Frequency	N/A 50 Hz60 Hz
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Continuous Service Factor for 50 Hertz (Hz) Frequency	N/A 1.0
Ambient Temperature¹	N/A 40 ºC
Elevation²	N/A 3300 ft
Shaft Material	N/A SUS304 Stainless Steel Shaft
Certification	N/A Canadian Standards Association (CSA) European Conformity (CE) National Electrical Manufacturers Association (NEMA) Premium Underwriters Laboratories (UR)
Junction Box Mounting	N/A F3

N/A

N/A

Class F Insulation
Class B Temperature Rise
NEMA Design B Torques
Stainless Steel Frame, End Brackets and Hardware
Grounding Terminal Inside Main Conduit Box
Stainless Steel Oversized Main Conduit Box - F3 Mounted for TEFC Footed, F1 Mounted for TEFC, and F1 Mounted for TENV Footed
Bi-Directional Rotation
Aluminum Die Cast Squirrel Cage Rotor Construction
Sealed Bearings Pre-Packed with POLYREX™ EM
Contact Lip Type Seal on Both Ends
Etched Nameplate on the Stainless Steel Frame
Dual Column Design Nameplate as Standard (60/50 Hz)
Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
- Motor service factor is 1.0 when operated on a VFD.

Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.

Inverter Duty Speed Range: 10:1 Variable Torque, 4:1 Constant Torque
9 Leads
Four Drain Holes on DE/NDE brackets
Motors are U.L. Recognized, CSA Approved and CE Marked
Department of Energy Efficiency Certificate # CC082A
Encapsulated windings available for all Washdown motors
- Food grade grease is available with M16 Mod.
IP69K available for all Washdown motors
BISSC third party verified

N/A Data subject to change without notice.

This equipment has been independently verified to conform to the ANSI/ASB/Z50.2 standard.

¹ Consult a Stock Product Application Specialist for suitability in higher ambient environments.
² Consult a Stock Product Application Specialist for suitability at higher elevations.

Brands