Gainesville Industrial Electric Co. - MAX-E1® Severe Duty, NEMA Premium, Three Phase, TEFC Motors

Unit of Measure

Items	EPF2008 MAX-E1® 200 Horsepower (hp), 900 Revolutions Per Minute (rpm), and 5007/9B Frame NEMA Premium Efficiency Three Phase TEFC Severe Duty Motor	EPF2008R MAX-E1® 200 Horsepower (hp), 900 Revolutions Per Minute (rpm), and 5007/9C Frame NEMA Premium Efficiency Three Phase TEFC Severe Duty Motor	EPF2508 MAX-E1® 250 Horsepower (hp), 900 Revolutions Per Minute (rpm), and 5007/9B Frame NEMA Premium Efficiency Three Phase TEFC Severe Duty Motor	EPF2508R MAX-E1® 250 Horsepower (hp), 900 Revolutions Per Minute (rpm), and 5007/9C Frame NEMA Premium Efficiency Three Phase TEFC Severe Duty Motor	EPF3006 MAX-E1® 300 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 5007/9B Frame NEMA Premium Efficiency Three Phase TEFC Severe Duty Motor
Description	N/A AFHH, TEFC, NEMA Premium, F3 Convertible
Brands	N/A TECO
Power	N/A 200 hp	N/A 200 hp	N/A 250 hp	N/A 250 hp	N/A 300 hp
Speed	N/A 900 rpm	N/A 900 rpm	N/A 900 rpm	N/A 900 rpm	N/A 1200 rpm
Frame Number	N/A 5007/9B	N/A 5007/9C	N/A 5007/9B	N/A 5007/9C	N/A 5007/9B
Full Load Efficiency	N/A 94.5 %	N/A 94.5 %	N/A 95.0 %	N/A 95.0 %	N/A 95.8 %
Full Load Power Factor	N/A 79.4 %	N/A 79.4 %	N/A 79.9 %	N/A 79.9 %	N/A 80.6 %
Full Load Ampere at 460 Volt (V) Voltage	N/A 250 A	N/A 250 A	N/A 309 A	N/A 309 A	N/A 364 A
Approximate Shipping Weight	N/A 3,700 lb	N/A 3,700 lb	N/A 3,900 lb	N/A 3,900 lb	N/A 3,900 lb
Enclosure	N/A Totally Enclosed Fan Cooled (IP55)
Voltage	N/A 460 V
Phase	N/A Three
Frequency	N/A 50 Hz60 Hz
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Continuous Service Factor for 50 Hertz (Hz) Frequency	N/A 1.0
Ambient Temperature¹	N/A 40 ºC
Elevation²	N/A 3300 ft
Shaft Material	N/A 1045 Carbon Steel Shaft
Applications	N/A Fans and Blowers Pumps Crushers Compressors Mixers Conveyors Any Severe-Duty/ Petro-Chem/Pulp & Paper Application
Features	N/A CSA Certified for Class I, Div. 2, Groups A, B, C, D - Temp Code T2D Minimum Various temp codes apply to ratings. Consult a stock product specialist for accurate code. CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3C Minimum Various temp codes apply to ratings. Consult a stock product specialist for accurate code. Class F Insulation Class B Temperature Rise NEMA Design B Torques Cast Iron Frame, End Brackets & Pressed Steel Fan Cover and Plate Main Conduit Box. Oversized Fabricated Steel Main Conduit Box Rotatable in 90 Degree Increments Fully Gasketed with NPT Threaded Entrance - F1 Mounted, Field Convertible to F2 and F3 Oversized Main Conduit Box Rotatable in 90 Degree Increments Designed for 40ºC Ambient Temperature Designed for 3300 ft. Elevation Bi-Directional Rotation; Except 2 Pole are Counter-Clockwise facing the DE Aluminum Die Cast Squirrel Cage Rotor Construction or Copper Bar Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Light Gray - Munsell N5.0 High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Metal Flinger on Both Ends Cast Iron Inner and Outer Bearing Caps Stainless Steel Nameplate Dual Column Design Nameplate as Standard (60/50 Hz) 6 Leads Motors are CSA Approved Dual Drilled or Tri-Drilled Feet Available on Most Ratings - Longer Frames (i.e. 5009 Drilled also for 5007) Pre-Formed Random Wound, Made of High Pulse Endurance Index Wire, CIV Tested to 2000V/0.1us Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 10:1 Variable Torque, 3:1 Constant Torque 2-Pole Motors 400 HP and Larger Standard Features: 100 Ohm Platinum Stator RTD's(2/Phase), Space Heaters(120V),and Insulated Non-Drive End Bearings Catalog Numbers Ending in "R" Come Standard with Roller Bearings for Belted Applications. Spotface 1/4-28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger
Note	N/A To check stock or order 575V motors, add "5" to the end of Catalog Number, for example: "EPF20085" for 200 HP, 900 RPM, 575V. Ratings above 500 HP do not have a NEMA Premium requirement, however do meet NEMA Premium Standards. Data subject to change without notice.
¹ Motor service factor is 1.0 when operated on a VFD. ² Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31.