Gainesville Industrial Electric Co. - MAX-E1™ Severe Duty, NEMA Premium, Three Phase, TEFC, Round Body Motors

AEUH8NDP, NEMA Premium, Round Body

Request Information

Unit of Measure

Items	EPV0254P MAX-E1™ 25 Horsepower (hp) and 1800 Revolutions Per Minute (rpm) Vertical Round Body Solid Shaft Normal/Medium Thrust Three Phase TEFC Severe Duty Motor	EPV0256P MAX-E1™ 25 Horsepower (hp) and 1200 Revolutions Per Minute (rpm) Vertical Round Body Solid Shaft Normal/Medium Thrust Three Phase TEFC Severe Duty Motor	EPV0304P MAX-E1™ 30 Horsepower (hp) and 1800 Revolutions Per Minute (rpm) Vertical Round Body Solid Shaft Normal/Medium Thrust Three Phase TEFC Severe Duty Motor	EPV0306P MAX-E1™ 30 Horsepower (hp) and 1200 Revolutions Per Minute (rpm) Vertical Round Body Solid Shaft Normal/Medium Thrust Three Phase TEFC Severe Duty Motor	EPV0404P MAX-E1™ 40 Horsepower (hp) and 1800 Revolutions Per Minute (rpm) Vertical Round Body Solid Shaft Normal/Medium Thrust Three Phase TEFC Severe Duty Motor
Description	N/A AEUH8NDP, NEMA Premium, Round Body
Brands	N/A TECO
Power	N/A 25 hp	N/A 25 hp	N/A 30 hp	N/A 30 hp	N/A 40 hp
Speed	N/A 1800 rpm	N/A 1200 rpm	N/A 1800 rpm	N/A 1200 rpm	N/A 1800 rpm
Frame Number	N/A 284/286HP	N/A 324/326HP	N/A 284/286HP	N/A 324/326HP	N/A 324/326HP
Full Load Efficiency	N/A 93.6 %	N/A 93.0 %	N/A 93.6 %	N/A 93.0 %	N/A 94.1 %
Full Load Power Factor	N/A 86.0 %	N/A 83.0 %	N/A 87.5 %	N/A 80.5 %	N/A 86.0 %
Full Load Ampere at 460 Volt (V) Voltage	N/A 29.1 A	N/A 30.3 A	N/A 34.3 A	N/A 37.5 A	N/A 46.3 A
Down Thrust	N/A 1295 lb	N/A 1750 lb	N/A 1295 lb	N/A 1750 lb	N/A 1395 lb
Dimension AG	N/A 29.1 in	N/A 32.6 in	N/A 30.6 in	N/A 34.0 in	N/A 32.6 in
Approximate Shipping Weight	N/A 441 lb	N/A 798 lb	N/A 490 lb	N/A 853 lb	N/A 682 lb
Enclosure	N/A Totally Enclosed Fan Cooled (286TS - 449T, IP55)
Voltage	N/A 230 V460 V
Phase	N/A Three
Frequency	N/A 50 Hz60 Hz
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Continuous Service Factor for 50 Hertz (Hz) Frequency	N/A 1.0
Ambient Temperature¹	N/A 40 ºC
Elevation²	N/A 3300 ft
Shaft Material	N/A 1045 Carbon Steel
Applications	N/A Centrifugal Pumps Petro-Chemical Water/ Wastewater Pulp and Paper
Features	N/A Voltage: 230/460V (Usable on 208V) Motors 7.5 HP & up are Suitable for Wye/Delta Starting. CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum Class F Insulation Class B Temperature Rise NEMA Design B Torques Cast Iron Frame, End Brackets, Fan Cover, Drip Cover and Main Conduit Box Cast Iron Fan Cover, Drip Cover 280 to 400 Frame, Rolled Steel Fan Cover, Drip Cover 440 Frames Grounding Terminal Inside Main Conduit Box Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Designed for 40ºC Ambient Temperature Designed for 3300 ft. Elevation Bi-Directional Rotation 1045 Carbon Steel Shaft, HP Mounting Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5B 3.5/0.5 Guide Bearings: Re-greasable Single Shielded with Mobil PolyrexTM EM Thrust Bearings: Re-Greasable Angular Contact with Mobil Polyrex™ EM Automatic Grease Discharge Fittings on Regreasable Models Double Contact Lip Seal on Both Ends Cast Iron Inner and Outer Bearing Caps Stainless Steel Nameplate Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1, Part 31 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1 Part 31. Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque Motors are c U.L. us, c CSA us Approved 12 Leads on Motors up to 125HP, 6 Leads on 150HP and Larger NEMA Type P Base and HP Shaft
Note	N/A Data subject to change without notice.
¹ Consult a Stock Product Application Specialist for suitability in higher ambient environments. ² Consult a Stock Product Application Specialist for suitability at higher elevations.