Gainesville Industrial Electric Co. - HBV-P Series MAX-E2/841®, Severe Duty, NEMA Premium, Three Phase, TEFC Motors

MAX-E2/841® Vertical Round Body Solid Shaft High Thrust with "P" Base - Low Voltage

AEUH8BDP, NEMA Premium

Request Information

Unit of Measure

Items	HBV7/56P MAX-E2/841® HBV-P Series 7.5 Horsepower (hp) and 1200 Revolutions Per Minute (rpm) Three Phase NEMA Premium TEFC Severe Duty Motor	HBV0106P MAX-E2/841® HBV-P Series 10 Horsepower (hp) and 1200 Revolutions Per Minute (rpm) Three Phase NEMA Premium TEFC Severe Duty Motor	HBV0152P MAX-E2/841® HBV-P Series 15 Horsepower (hp) and 3600 Revolutions Per Minute (rpm) Three Phase NEMA Premium TEFC Severe Duty Motor	HBV0154P MAX-E2/841® HBV-P Series 15 Horsepower (hp) and 1800 Revolutions Per Minute (rpm) Three Phase NEMA Premium TEFC Severe Duty Motor	HBV0156P MAX-E2/841® HBV-P Series 15 Horsepower (hp) and 1200 Revolutions Per Minute (rpm) Three Phase NEMA Premium TEFC Severe Duty Motor
Description	N/A MAX-E2/841® Vertical Round Body Solid Shaft High Thrust with "P" Base - Low Voltage AEUH8BDP, NEMA Premium
Brands	N/A TECO
Power	N/A 7.5 hp	N/A 10 hp	N/A 15 hp	N/A 15 hp	N/A 15 hp
Speed	N/A 1200 rpm	N/A 1200 rpm	N/A 3600 rpm	N/A 1800 rpm	N/A 1200 rpm
Frame Number	N/A 254LP	N/A 256LP	N/A 254LP	N/A 254LP	N/A 284LP
Full Load Efficiency	N/A 91.0 %	N/A 91.0 %	N/A 92.4 %	N/A 92.4 %	N/A 92.4 %
Full Load Power Factor	N/A 80.5 %	N/A 80.5 %	N/A 91.5 %	N/A 88.0 %	N/A 83.5 %
Full Load Ampere at 230 Volt (V)	N/A 9.59 A	N/A 12.8 A	N/A 16.6 A	N/A 17.3 A	N/A 18.2 A
Down Thrust	N/A 975 lb	N/A 110 lb	N/A 740 lb	N/A 950 lb	N/A 1200 lb
Dimension AG	N/A 26.0 in	N/A 27.8 in	N/A 26.0 in	N/A 26.0 in	N/A 29.1 in
Approximate Shipping Weight	N/A 323 lb	N/A 380 lb	N/A 323 lb	N/A 345 lb	N/A 540 lb
Enclosure	N/A Totally Enclosed Fan Cooled (IP55)
Voltage¹	N/A 460 V
Phase	N/A Three
Frequency	N/A 50 Hz60 Hz
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Continuous Service Factor for 50 Hertz (Hz) Frequency	N/A 1.0
Ambient Temperature²	N/A 40 ºC
Elevation³	N/A 3300 ft
Shaft Material	N/A 1045 Carbon Steel Shaft, LP Mounting
Certification	N/A Canadian Standards Association (CSA) ee CC002A National Electrical Manufacturers Association (NEMA) Premium Underwriters Laboratories (UL)
Applications	N/A Centrifugal Pumps Petro-Chemical Water/Wastewater Pulp and Paper
Features	N/A CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum Meets or Exceeds IEEE 841 Standards Extended Warranty - 60 Months from Date of Manufacture Class F Insulation Class B Temperature Rise NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C Cast Iron Frame, End Brackets, Fan Cover, Drip Cover and Main Conduit Box Grounding Terminal Inside Main Conduit Box with additional Foot Grounding Provision Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: 2 Part Epoxy Paint Color: Blue - Munsell 5PB 3/8 Guide Bearings: Re-Greasable Single Shielded with Mobil Polyrex™ EM Thrust Bearings: Re-Greasable Double Stack Angular Contact with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Cast Iron Inner and Outer Bearing Caps for all frames VBXX INPRO™ Seals Installed on Both Ends Stainless Steel Nameplate and Hardware Stainless Steel Automatic Breather Drain (Located at both End Brackets for Vertical Mounts) Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31. Motor service factor is 1.0 when operated on a VFD Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque Motors are U.L., CSA Approved 3 Leads Only Vibration Not to Exceed 0.08 Inches Per Second Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded NEMA Type P Base With LP Shaft
Note	N/A Data subject to change without notice.
¹ 575 V motors available Motors 7.5 HP & up are suitable for wye/delta starting. ² Consult a Stock Product Application Specialist for suitability in higher ambient environments. ³ Consult a Stock Product Application Specialist for suitability at higher elevations.