Gainesville Industrial Electric Co. - VSKP Series NEMA Premium Three Phase Vertical Solid Shaft Motors

AMRKED, Premium Efficiency

Request Information Search by Specification

Unit of Measure

Items	VSKP2006 VSKP Series 200 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 449VP Frame NEMA Premium Three Phase Vertical Solid Shaft Motor	VSKP2008 VSKP Series 200 Horsepower (hp), 900 Revolutions Per Minute (rpm), and 5009VP Frame NEMA Premium Three Phase Vertical Solid Shaft Motor	VSKP2504 VSKP Series 250 Horsepower (hp), 1800 Revolutions Per Minute (rpm), and 449VP Frame NEMA Premium Three Phase Vertical Solid Shaft Motor	VSKP2506 VSKP Series 250 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 449VP Frame NEMA Premium Three Phase Vertical Solid Shaft Motor	VSKP2508 VSKP Series 250 Horsepower (hp), 900 Revolutions Per Minute (rpm), and 5009VP Frame NEMA Premium Three Phase Vertical Solid Shaft Motor
Description	N/A AMRKED, Premium Efficiency
Brands	N/A TECO
Power	N/A 200 hp	N/A 200 hp	N/A 250 hp	N/A 250 hp	N/A 250 hp
Speed	N/A 1200 rpm	N/A 900 rpm	N/A 1800 rpm	N/A 1200 rpm	N/A 900 rpm
Frame Number	N/A 449VP	N/A 5009VP	N/A 449VP	N/A 449VP	N/A 5009VP
Full Load Efficiency	N/A 94.9 %	N/A 93.6 %	N/A 95.0 %	N/A 95.0 %	N/A 94.5 %
Full Load Power Factor	N/A 81.0 %	N/A 73.0 %	N/A 82.2 %	N/A 80.0 %	N/A 75.3 %
Full Load Ampere at 230 Volt (V)	N/A 25.5 A	N/A 27.5 A	N/A 30.0 A	N/A 31.5 A	N/A 33.0 A
Down Thrust	N/A 11,200 lb	N/A 39,500 lb	N/A 10,000 lb	N/A 11,200 lb	N/A 39,500 lb
Dimension BD	N/A 20.0 in	N/A 24.5 in	N/A 20.0 in	N/A 20.0 in	N/A 24.5 in
Approximate Shipping Weight	N/A 3,620 lb	N/A 4,210 lb	N/A 3,710 lb	N/A 3,730 lb	N/A 4,570 lb
Enclosure	N/A Weather Protected Type I (WPI)
Voltage	N/A 2300 V4000 V
Phase	N/A Three
Frequency	N/A 60 Hz
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Ambient Temperature¹	N/A 40 ºC
Elevation²	N/A 3300 ft
Shaft Material	N/A 1045 Solid Carbon Steel Shaft
Certification	N/A Canadian Standards Association (CSA) European Conformity (CE) Fire Safety National Electrical Manufacturers Association (NEMA) Premium Underwriters Laboratories (UR)
Dimension U	N/A 2.875 in	N/A 3.375 in	N/A 2.875 in	N/A 2.875 in	N/A 3.375 in
Dimension AH	N/A 6.00 in
Applications	N/A Deep Well Turbine Pumps Irrigation Water/Wastewater
Features	N/A Inverter Duty (PWM) per NEMA® MG-1 Part 31 Standard Features: Ball Type NRR, Drip/Splash Cover, Space Heaters (120V) 5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing Class F Insulation with VPI Epoxy Resin Varnish Class B Temperature Rise NEMA Design B Torques Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance Steel Plate Conduit Box for F#449-5800 Counterclockwise (CCW) Rotation; Viewed from Top Cast Iron Frame & End Brackets Aluminum Die Cast Squirrel Cage Rotor Construction for F#449TP and Below 4pole; 6-8 pole copper fabricated rotor Squirrel Cage Copper or Copper Alloy Bar Rotor Construction for F#5000 Paint System: Paint System Epoxy Base Coat Plus Polyurethane Top Cover Paint Color: Blue - Munsell 5PB 3/8 Guide Bearings: 449VP - 5810VP Frames are Re-Greasable with Mobil Polyrex™ EM Grease Thrust Bearings: 449VP - 5810VP Frames are Oil Lubricated Angular Contact or Spherical Thrust Bearing with Site Glass Oil Requirements for 444VP - 5810VP Frames: 300 S.S.U. @ 100ºF Grease Discharge Fittings on Frames with Re-Greasable Motors Metal Flinger on Lower End Bracket Grounding Terminal Inside Main Box Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Speed Ranges: 10:1 VT, 4:1 CT 6 Leads UL Recognized and CSA Approved Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by VFD as stated per NEMA MG-1 Part 31. Ball Type NRR Provided
Note	N/A Data subject to change without notice.
¹ Consult a Stock Product Application Specialist for suitability in higher ambient environments. ² Consult a Stock Product Application Specialist for suitability at higher elevations.