Exit
1011 Athens Street
Gainesville, GA 30501 USA
Gainesville Industrial Electric
Features
  • Insulation Class F, Temperature rise B or F, 40 ºC ambient
  • Cast Iron construction, 460 V, Direct-on-line & Inverter duty
  • WTD PT 100 Ohm 2 EA/Phase
  • BTD PT 100 Ohm 1 EA/Bearing
  • Heater 1 EA/Motor
  • Auxiliary Terminal Box 2EA/Motor
Unit of Measure
Items
HSDE Model Severe Duty, Large Motor Three Phase, TEFC, Foot Mounted Electric Motors

HSDE Model 296.3 Ampere (A) Full Load Current Electric Motor

HSDE Model Severe Duty, Large Motor Three Phase, TEFC, Foot Mounted Electric Motors

HSDE Model 327.5 Ampere (A) Full Load Current Electric Motor

HSDE Model Severe Duty, Large Motor Three Phase, TEFC, Foot Mounted Electric Motors

HSDE Model 333.6 Ampere (A) Full Load Current Electric Motor

HSDE Model Severe Duty, Large Motor Three Phase, TEFC, Foot Mounted Electric Motors

HSDE Model 350.9 Ampere (A) Full Load Current Electric Motor

HSDE Model Severe Duty, Large Motor Three Phase, TEFC, Foot Mounted Electric Motors

HSDE Model 378.5 Ampere (A) Full Load Current Electric Motor
Description N/A Features
  • Insulation Class F, Temperature rise B or F, 40 ºC ambient
  • Cast Iron construction, 460 V, Direct-on-line & Inverter duty
  • WTD PT 100 Ohm 2 EA/Phase
  • BTD PT 100 Ohm 1 EA/Bearing
  • Heater 1 EA/Motor
  • Auxiliary Terminal Box 2EA/Motor
Brands N/A HD Hyundai Electric
Model N/A HSDE
Power N/A 250 hp N/A 300 hp N/A 300 hp N/A 300 hp N/A 350 hp
Frame Number N/A L449T N/A L449TS N/A L449T N/A L449T N/A L449TS
Speed N/A 1185 rpm N/A 3570 rpm N/A 1785 rpm N/A 1185 rpm N/A 3570 rpm
Voltage N/A 460 V
Full Load Efficiency N/A 95.8 % N/A 95.8 % N/A 96.2 % N/A 95.8 % N/A 95.8 %
Full Load Power Factor N/A 0.84 N/A 0.90 N/A 0.88 N/A 0.84 N/A 0.90
Full Load Current N/A 296.3 A N/A 327.5 A N/A 333.6 A N/A 350.9 A N/A 378.5 A
Locked Rotor Amperage N/A 680 % N/A 700 % N/A 710 % N/A 675 % N/A 700 %
Rated Torque N/A 1129.6 lb·ft N/A 444.0 lb·ft N/A 888.1 lb·ft N/A 1337.7 lb·ft N/A 513.1 lb·ft
Locked Rotor Torque at Full Load N/A 135 % N/A 130 % N/A 135 % N/A 135 % N/A 130 %
Break Down Torque at Full Load N/A 200 % N/A 225 % N/A 225 % N/A 220 % N/A 225 %
Sound Pressure Level N/A 80 dBA N/A 87 dBA N/A 85 dBA N/A 80 dBA N/A 87 dBA
Approximate Weight N/A 2890 lb N/A 2890 lb N/A 2890 lb N/A 3320 lb N/A 3090 lb
Phase N/A 3
Mounting Configuration N/A Foot
Standards and Certifications N/A LV NEMA Motor U.S Standard
Frequency N/A 60 Hz
Altitude N/A 3300 ft
Ambient Temperature N/A 40 ºC
Enclosure N/A Totally Enclosed (Protection : IP55)
Method of Cooling N/A IC411 (FC)
Efficiency N/A National Electrical Manufacturers Association (NEMA) Premium
Duty N/A Continuous (S1)
Design N/A NEMA Design B Torque
Insulation Class N/A F (Impregnation Resin & Magnet wire : Class H) Inverter duty, Exceeds NEMA MG-1 Part 31
Sine Wave Power for Temperature Rise N/A B
Variable Frequency Drive (VFD) Power for Temperature Rise N/A F
Sine Wave Power N/A 1.15
Variable Frequency Drive (VFD) Power for Service Factor N/A 1.0
Variable Torque Frequency Range at 50 Percent (%) Load N/A 3 to 60 Hz
Constant Torque Frequency Range N/A 6 to 60 Hz
Inverter Duty N/A Constant HP
Foot Mount (B3) N/A Foot Drilled Hole (s)
Frame Material N/A Cast-Iron
Rotor Material N/A Aluminum Die Casting Centrifugal Cast Aluminum
End-Shield Material N/A Cast-iron
Fan Material N/A Non-Sparking Conductive Plastic Fan
Fan Cover Material N/A Steel
Rotation N/A N/A N/A Bi-Directional N/A Bi-Directional N/A
Drive End Bearing N/A Ball or Roller, Regreasable
Non-Drive End Bearing N/A Ball or Insulation, Regreasable
Bearing Protection N/A N/A N/A V-Seal N/A N/A
Inner Bearing Cap N/A Applied
Lubrication N/A Polyurea (Polyrex EM Grease)
Shaft Material N/A N/A N/A AISI 4140 N/A N/A
Shaft DE Threaded Hole N/A Applied
Shaft DE Keyway N/A Opened keyway
Shaft Locking Device N/A Frames with Roller Bearing (To Prevent Bearing Brinelling)
Terminal Box Material N/A Cast-Iron
Terminal Box Mounting N/A F1 F2
Cable Hole Plug N/A Plastic
Number of Lead Cable Wire N/A 6 Lead (s)
Accessories N/A W.T.D (PT 100 Ohm)
2 EA / phase

B.T.D (PT 100 Ohm)
1 EA / Bearing

Space Heater
1 EA / Motor

Auxiliary Terminal box
2 EA / Motor
Drain Plug Frame N/A Both Sides of Frame Bottom
Drain Plug Main Terminal Box N/A None
Drain Plug Grease Outlet N/A Applied
Tap Provision for Vibration Sensor N/A Applied
Tap Provision for B.T.D N/A Applied
Certification N/A CSA - Class I, Division 2 - Groups A, B, C & D
CSA - Class II, Division 2 - Groups F & G
CSA - CSA C-390 - Premium Efficinecy (Up to 500 HP)

DOE - DOE Certification #CC0038A - Department of Energy Efficiency

CE - EN 60034-1 - CE Declaration of Conformity

IEEE45 - ABS Product Type Approval - Marine Duty
Name Plate Markings N/A Certified Security Associate (CSA) Creative Commons (CC) (Department of Education (DOE)) European Conformity (CE)
Name Plate Material N/A Stainless Steel AISI304
Painting Type N/A Polyurethane Top Coat
Painting Color N/A Munsell 4.0PB5.4/5.5
Common Lifting Device N/A Eye Bolt (s)
Common Warranty N/A 3 Years from Date of Shipment
Features N/A Tap provision for Vib. sensor (Except Vib. sensor)
Note N/A
  • For Electrical performances of 575 V Motor(s), please inquire with us, HD Hyundai Electric America.
  • Remarks
  1. Applicable to Each single of accessory (Ex. IB, SH, IBSH & etc.)
  2. Standard temperature rise B for HSDE Model (Except 900 HP Motor)
  3. Motor power(HP) for HSDE model : Up to 900 HP