Gainesville Industrial Electric Co. - DHP Series General Purpose, Cast Iron, Open Drip Proof (ODP) Motors

Unit of Measure

Items	DHP0014 DHP Series 1 Horsepower (hp), 1800 Revolutions Per Minute (rpm), and 143T Frame Cast Iron ODP General Purpose Motor	DHP00145 DHP Series 1 Horsepower (hp), 1800 Revolutions Per Minute (rpm), and 143T Frame Cast Iron ODP General Purpose Motor	DHP0016 DHP Series 1 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 145T Frame Cast Iron ODP General Purpose Motor	DHP00165 DHP Series 1 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 145T Frame Cast Iron ODP General Purpose Motor	DHP1/52 DHP Series 1.5 Horsepower (hp), 3600 Revolutions Per Minute (rpm), and 143T Frame Cast Iron ODP General Purpose Motor
Description	N/A ASHH, NEMA Premium
Brands	N/A TECO
Power	N/A 1 hp	N/A 1 hp	N/A 1 hp	N/A 1 hp	N/A 1.5 hp
Speed	N/A 1800 rpm	N/A 1800 rpm	N/A 1200 rpm	N/A 1200 rpm	N/A 3600 rpm
Frame Number	N/A 143T	N/A 143T	N/A 145T	N/A 145T	N/A 143T
Full Load Efficiency	N/A 85.5 %	N/A 85.5 %	N/A 82.5 %	N/A 82.5 %	N/A 85.5 %
Full Load Power Factor	N/A 78.0 %	N/A 78.0 %	N/A 65.5 %	N/A 65.5 %	N/A 80.0 %
Full Load Ampere at 460/575 Volt (V) Voltage	N/A 1.41 A	N/A 1.13 A	N/A 1.74 A	N/A 1.39 A	N/A 2.06 A
Approximate Shipping Weight	N/A 54 lb	N/A 54 lb	N/A 75 lb	N/A 75 lb	N/A 50 lb
Enclosure	N/A Open Drip Proof (IP22)
Voltage	N/A 230 V460 V
Phase	N/A Three
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Continuous Service Factor for 50 Hertz (Hz) Frequency	N/A 1.0
Ambient Temperature	N/A 40 ºC
Elevation	N/A 3300 ft
Shaft Material	N/A 1045 Carbon Steel
Applications	N/A Fans and Blowers Pumps HVAC Equipment Compressors Fire Pumps
Features	N/A Class F Insulation Class B Temperature Rise NEMA Design B Torques Cast Iron Frame and End Brackets Rolled Steel Main Conduit Box Grounding Terminal Inside Main Conduit Box Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Light Gray - Munsell N5.0 Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T - 280T (Non-regreasable) High Quality Ball (or Roller) Bearings regreasable with Mobil Polyrex™ EM for F# 280TS and Larger Labyrinth Type Metal Flinger on Both Ends for F# 280TS and Larger Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger Stainless Steel Nameplate New Dual Column Design Nameplate as Standard (60/50 Hz) Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2(4,5) Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque 9 Leads for 5 HP and Smaller 12 Leads for 7.5 HP to 125 HP 6 Leads for 150 HP and Larger Motors are U.L. Recognized, CSA Approved and CE Marked
Note	N/A Fire Pump available. Available in 575V. TWMC carries minimal 575V stock; please check availability to ensure required motors are in stock. Ratings may be available from our Canadian warehouses and/or our factory. Pricing and leadtime may vary. Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Delivery for Fire Pump Duty motor (Catalog Number + FP) is standard 5 - 10 working days after receipt of order if standard motor is in stock; Painting to Fire Safety Red requirement on Fire Pump Duty type motor can be waived in order to expedite delivery upon request. Fire Pump Duty Motor pricing includes: adding UL nameplate, restamping original nameplate to new "DHP_FP" catalog number, To order 575V, add "5" to the end of Catalog Number, for example: "DHP00545" for 5 HP, 1800 RPM, 575V. "R" = Motor stocked standard with a Drive-End Roller Bearing. Ratings 150 HP and larger are 460V only. Data subject to change without notice.
Industry Standards and Approval	N/A Underwriters Laboratories