Gainesville Industrial Electric Co. - CD Series MAX-HT™, Severe Duty, NEMA Premium, Three Phase, TEFC Motors

Unit of Measure

Items	CD3008R MAX-HT™ CD Series 300 Horsepower (hp), 900 Revolutions Per Minute (rpm), and 5806C Frame Three Phase NEMA Premium TEFC Severe Duty Motor	CD4006R MAX-HT™ CD Series 400 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 5808C Frame Three Phase NEMA Premium TEFC Severe Duty Motor	CD4006RZ MAX-HT™ CD Series 400 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 586/7UZ Frame Three Phase NEMA Premium TEFC Severe Duty Motor	CD4008R MAX-HT™ CD Series 400 Horsepower (hp), 900 Revolutions Per Minute (rpm), and 5808C Frame Three Phase NEMA Premium TEFC Severe Duty Motor	CD4506R MAX-HT™ CD Series 450 Horsepower (hp), 1200 Revolutions Per Minute (rpm), and 5808C Frame Three Phase NEMA Premium TEFC Severe Duty Motor
Description	N/A AEEAGD, EPACT Design C, Low Voltage Crusher Duty
Brands	N/A TECO
Power	N/A 300 hp	N/A 400 hp	N/A 400 hp	N/A 400 hp	N/A 450 hp
Speed	N/A 900 rpm	N/A 1200 rpm	N/A 1200 rpm	N/A 900 rpm	N/A 1200 rpm
Frame Number	N/A 5806C	N/A 5808C	N/A 586/7UZ	N/A 5808C	N/A 5808C
Full Load Efficiency	N/A 94.5 %	N/A 95.0 %	N/A 95.0 %	N/A 95.0 %	N/A 95.4 %
Full Load Power Factor	N/A 81.0 %	N/A 85.5 %	N/A 85.5 %	N/A 81.0 %	N/A 85.5 %
Full Load Ampere at 230 Volt (V)	N/A 367 A	N/A 461 A	N/A 461 A	N/A 487 A	N/A 517 A
Approximate Shipping Weight	N/A 5,093 lb	N/A 5,100 lb	N/A 6,020 lb	N/A 5,828 lb	N/A 5,565 lb
Enclosure	N/A Totally Enclosed Fan Cooled (IP55)
Voltage¹	N/A 460 V
Phase	N/A Three
Frequency	N/A 50 Hz60 Hz
Continuous Service Factor for 60 Hertz (Hz) Frequency	N/A 1.15
Continuous Service Factor for 50 Hertz (Hz) Frequency	N/A 1.0
Ambient Temperature²	N/A 40 ºC
Elevation³	N/A 3300 ft
Shaft Material	N/A High Strength 4140 AISI Steel Shaft
Certification	N/A Canadian Standards Association (CSA) ee CC002A European Conformity (CE) NEMA Premium Underwriters Laboratories (UL)
Applications	N/A Crushers Ball Mills/Rolling Mills Impactors Any High Torque Application Chippers/Shredders
Features	N/A Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than 200% Starting Torque/250% Breakdown Torque Cast Iron Frame, End Brackets; Pressed Steel Plate Main Conduit Box and Fan Cover Cast Iron Main Conduit Box of 505UZ Frame Grounding Terminal Inside Main Conduit Box with additional Foot Grounding Provision Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5 High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Metal Flinger on Both Ends Cast Iron Inner and Outer Bearing Caps Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 3:1 Constant Torque 6 Leads Standard With Thermistors (PTC 140°C) 1 per Phase Locknut and Washer on NDE for Vertical Shaft Down Applications Drain Holes/Plugs on Both End Brackets for Vertical Applications Threaded One Way Breather Drains for Horizontal Mount Applications Motors are CSA Approved Spotface 1/4-28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger	N/A Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than 200% Starting Torque/250% Breakdown Torque Cast Iron Frame, End Brackets; Pressed Steel Plate Main Conduit Box and Fan Cover Cast Iron Main Conduit Box of 505UZ Frame Grounding Terminal Inside Main Conduit Box with additional Foot Grounding Provision Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5 High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Metal Flinger on Both Ends Cast Iron Inner and Outer Bearing Caps Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 3:1 Constant Torque 6 Leads Standard With Thermistors (PTC 140°C) 1 per Phase Locknut and Washer on NDE for Vertical Shaft Down Applications Drain Holes/Plugs on Both End Brackets for Vertical Applications Threaded One Way Breather Drains for Horizontal Mount Applications Motors are CSA Approved Spotface 1/4-28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger	N/A Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than 200% Starting Torque/250% Breakdown Torque Cast Iron Frame, End Brackets; Pressed Steel Plate Main Conduit Box and Fan Cover Cast Iron Main Conduit Box of 505UZ Frame Grounding Terminal Inside Main Conduit Box with additional Foot Grounding Provision Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5 High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Metal Flinger on Both Ends Cast Iron Inner and Outer Bearing Caps Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 3:1 Constant Torque 6 Leads Standard With Thermistors (PTC 140°C) 1 per Phase Locknut and Washer on NDE for Vertical Shaft Down Applications Drain Holes/Plugs on Both End Brackets for Vertical Applications Threaded One Way Breather Drains for Horizontal Mount Applications Motors are CSA Approved Spotface 1/4-28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger	N/A Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than 200% Starting Torque/250% Breakdown Torque Cast Iron Frame, End Brackets; Pressed Steel Plate Main Conduit Box and Fan Cover Cast Iron Main Conduit Box of 505UZ Frame Grounding Terminal Inside Main Conduit Box with additional Foot Grounding Provision Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5 High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Metal Flinger on Both Ends Cast Iron Inner and Outer Bearing Caps Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 3:1 Constant Torque 6 Leads Standard With Thermistors (PTC 140°C) 1 per Phase Locknut and Washer on NDE for Vertical Shaft Down Applications Drain Holes/Plugs on Both End Brackets for Vertical Applications Threaded One Way Breather Drains for Horizontal Mount Applications Motors are CSA Approved Spotface 1/4-28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger	N/A Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than Class F Insulation Class B Temperature Rise NEMA Design C Torques; Equal or Greater Than 200% Starting Torque/250% Breakdown Torque Cast Iron Frame, End Brackets; Pressed Steel Plate Main Conduit Box and Fan Cover Cast Iron Main Conduit Box of 505UZ Frame Grounding Terminal Inside Main Conduit Box with additional Foot Grounding Provision Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted Bi-Directional Rotation Aluminum Die Cast Squirrel Cage Rotor Construction Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5 High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Automatic Grease Discharge Fittings Metal Flinger on Both Ends Cast Iron Inner and Outer Bearing Caps Stainless Steel Nameplate Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31. Inverter Duty Speed Range: 3:1 Constant Torque 6 Leads Standard With Thermistors (PTC 140°C) 1 per Phase Locknut and Washer on NDE for Vertical Shaft Down Applications Drain Holes/Plugs on Both End Brackets for Vertical Applications Threaded One Way Breather Drains for Horizontal Mount Applications Motors are CSA Approved Spotface 1/4-28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger
Note	N/A Per DOE regulations, the smaller frame non-exempt High Efficiency inventory was obsoleted in June 2018, and only has minimal inventory. Data subject to change without notice.
¹ 575 V motors available on a made-to order basis. Consult a Stock Product Application Specialist for details. ² Consult a Stock Product Application Specialist for suitability in higher ambient environments. ³ Consult a Stock Product Application Specialist for suitability at higher elevations.