Features
- Insulation Class F, Temperature rise B, 40 ºC ambient
- 230/460 V (~125 HP), 460 V (150 HP~)
- NEMA Design B
- Cast Iron construction, Direct-on-line & Inverter duty
- IP55, Diagonally split, Gasketed terminal box
- Tap provision for Vib. sensor & Bearing Temp. Detector (Except Vib. sensor & Bearing Temp. Detector)
Unit of Measure
Specifications
|
Torque
|
Standards and Certifications
|
Electrical Features
|
Mechanical Features
|
Features
|
Note
Specifications
Brands |
N/A HD Hyundai Electric |
Model |
N/A HES |
Power |
N/A 2 hp |
Frame Number |
N/A 184T |
Speed |
N/A 1175 rpm |
Voltage |
N/A 230 V460 V |
Full Load Efficiency |
N/A 88.5 % |
Full Load Power Factor |
N/A 0.68 |
Full Load Current |
N/A 3.13 A6.26 A |
Locked Rotor Amperage |
N/A 790 % |
Sound Pressure Level |
N/A 55 dBA |
Approximate Weight |
N/A 105 lb |
Phase |
N/A 3 |
Mounting Configuration |
N/A Foot |
Torque
Rated Torque |
N/A 8.99 lb·ft |
Locked Rotor Torque at Full Load |
N/A 180 % |
Break Down Torque at Full Load |
N/A 260 % |
Electrical Features
Frequency |
N/A 60 Hz |
Altitude |
N/A 3300 ft |
Ambient Temperature |
N/A 40 ºC |
Enclosure |
N/A Totally Enclosed (Protection : IP55) |
Method of Cooling |
N/A IC411 (FC) |
Efficiency |
N/A National Electrical Manufacturers Association (NEMA) Premium |
Duty |
N/A Continuous (S1) |
Design |
N/A NEMA Design B Torque |
Insulation Class |
N/A F (Impregnation Resin & Magnet wire : Class H) Inverter duty, Exceeds NEMA MG-1 Part 31 |
Sine Wave Power for Temperature Rise |
N/A B |
Variable Frequency Drive (VFD) Power for Temperature Rise |
N/A F |
Sine Wave Power for Service Factor |
N/A 1.15 |
Variable Frequency Drive (VFD) Power for Service Factor |
N/A 1.0 |
Temperature Rise F and Non-Hazardous for Service Factor |
N/A 1.25 |
Inverter Duty |
N/A
Variable Torque 6 - 60 Hz : Applicable Variable Torque 3 - 60 Hz : Applicable at 50 % Load Constant Torque 6 - 60 Hz : Applicable Constant HP : CHP up to 1.5 times base speed |
Mechanical Features
Foot Mount (B3) |
N/A Foot Drilled Hole (s) |
Frame Material |
N/A Cast-Iron |
Rotor Material |
N/A Aluminum Die Casting |
End-Shield Material |
N/A Cast-iron |
Fan Material |
N/A Non-Sparking Conductive Plastic Fan |
Fan Cover Material |
N/A Steel |
Rotation |
N/A Bi-Directional |
Bearing Protection |
N/A V-Seal |
Lubrication |
N/A Polyurea (Polyrex EM Grease) |
Shaft Material |
N/A AISI 1045 |
Shaft DE Threaded Hole |
N/A Applied |
Shaft DE Keyway |
N/A Opened keyway |
Shaft Locking Device |
N/A Frames with Roller Bearing (To Prevent Bearing Brinelling) |
Terminal Box Material |
N/A Cast-Iron |
Terminal Box Mounting |
N/A F1 to F2 Conversion Available |
Cable Hole Plug |
N/A Plastic |
Number of Lead Cable Wire |
N/A 9 Lead (s) |
Drain Plug Frame |
N/A Both Sides of Frame Bottom |
Drain Plug Main Terminal Box |
N/A None |
Certification |
N/A
CSA - Class I, Division 2 - Groups A, B, C & D CSA - Class II, Division 2 - Groups E, F & G CSA - CSA C-390 - Premium Efficinecy DOE - DOE Certification #CC0038A - Department of Energy Efficiency CE - EN 60034-1 - CE Declaration of Conformity IEEE45 - ABS Product Type Approval - Marine Duty UL - Ordinary location - #E211828 |
Name Plate Markings |
N/A Certified Security Associate (CSA) Creative Commons (CC) (Department of Education (DOE)) European Conformity (CE) Institute of Electrical and Electronics Engineers (IEEE45) Recognized Component Mark (RU) |
Name Plate Material |
N/A Stainless Steel AISI304 |
Painting Type |
N/A Polyurethane Top Coat |
Painting Color |
N/A Munsell 4.0PB5.4/5.5 |
Common Lifting Device |
N/A Eye Bolt (s) |
Common Warranty |
N/A 3 Years from Date of Shipment |
