Features
- Insulation Class F, Temperature rise B or F, 40 ºC ambient
- 230/460 V (~ 125 HP), 460 V (150 HP ~ 250 HP)
- Class 1 Division 1 Group C&D Temp. code T4 with Thermostat (1 EA/Ph.)
- Cast Iron construction, Direct-on-line & Inverter duty
- IP55, Diagonally split, Gasketed terminal box, Fully rotatable at 90 increments
- Tap provision for Vib. sensor & Bearing Temp. Detector (Except Vib. sensor & Bearing Temp. Detector)
Unit of Measure
Specifications
|
Torque
|
Standards and Certifications
|
Electrical Features
|
Mechanical Features
|
Note
Specifications
Brands |
N/A HD Hyundai Electric |
Model |
N/A IXHHI |
Power |
N/A 5 hp |
Frame Number |
N/A 215TC |
Speed |
N/A 1180 rpm |
Voltage |
N/A 230 V460 V |
Full Load Efficiency |
N/A 89.5 % |
Full Load Power Factor |
N/A 0.68 |
Full Load Current |
N/A 7.63 A15.26 A |
Locked Rotor Amperage |
N/A 680 % |
Sound Pressure Level |
N/A 62 dBA |
Approximate Weight |
N/A 180 lb |
Phase |
N/A 3 |
Mounting Configuration |
N/A C - Faced Foot Mounted |
Torque
Rated Torque |
N/A 22.09 lb·ft |
Locked Rotor of Full Load Torque |
N/A 170 % |
Break Down Torque at Full Load |
N/A 220 % |
Electrical Features
Frequency |
N/A 60 Hz |
Altitude |
N/A 3300 ft |
Ambient Temperature |
N/A 40 ºC |
Enclosure |
N/A Totally Enclosed (Protection : IP55) |
Method of Cooling |
N/A IC411 (FC) |
Efficiency |
N/A National Electrical Manufacturers Association (NEMA) Premium |
Duty |
N/A Continuous (S1) |
Design |
N/A NEMA Design B Torque |
Insulation Class |
N/A F (Impregnation Resin and Magnet wire : Class H) Inverter duty, Exceeds NEMA MG-1 Part 31 |
Sine Wave Power for Temperature Rise |
N/A B |
Variable Frequency Drive (VFD) Power for Temperature Rise |
N/A F |
Sine Wave Power for Service Factor |
N/A 1.15 |
Variable Frequency Drive (VFD) Power for Service Factor |
N/A 1.0 |
Temperature Rise F and Non-Hazardous for Service Factor |
N/A 1.25 |
Variable Torque Frequency Range at 50 Percent (%) Load |
N/A 3 to 60 Hz |
Constant Torque Frequency Range |
N/A 10.5 to 60 Hz |
Constant Torque Frequency Range at 1 Hour Duty |
N/A 6 to 60 |
Inverter Duty |
N/A Constant HP - CHP up to 1.5 Times Base Speed |
Mechanical Features
Mounting |
N/A C-face with Foot (B35) |
Frame Material |
N/A Cast-Iron |
Rotor Material |
N/A Aluminum Die Casting |
End-Shield Material |
N/A Cast-iron |
Fan Material |
N/A Non-Sparking Conductive Plastic Fan |
Fan Cover Material |
N/A Steel |
Rotation |
N/A Bi-Directional |
Bearing Protection |
N/A V-Seal |
Inner Bearing Cap |
N/A Applied |
Lubrication |
N/A Polyurea (Polyrex EM Grease) |
Shaft Material |
N/A AISI 1045 |
Shaft DE Threaded Hole |
N/A Applied |
Shaft DE Keyway |
N/A Opened keyway |
Shaft Locking Device |
N/A Frames with Roller Bearing (To Prevent Bearing Brinelling) |
Terminal Box Material |
N/A Cast-Iron |
Terminal Box Mounting |
N/A F1 to F2 Conversion Available |
Terminal Box Cable Hole Plug Material |
N/A Plastic |
Number of Lead Cable Wire |
N/A 9 Lead (s) |
Accessories |
N/A
W.T.D (Thermostat) 1 EA / phase (145 ?) |
Drain Plug Frame |
N/A Both Sides of Frame Bottom |
Certification |
N/A
UL - Class I, Division 1 - Groups C & D UL - Class II, Division 1 - Groups F & G CSA - CSA C-390 - Premium Efficinecy DOE - DOE Certification #CC0038A - Department of Energy Efficiency CE - EN 60034-1 - CE Declaration of Conformity |
Name Plate Markings |
N/A Certified Security Associate (CSA) Creative Commons (CC) (Department of Education (DOE)) European Conformity (CE) UL LISTED |
Name Plate Material |
N/A Stainless Steel AISI304 |
Painting Type |
N/A Polyurethane Top Coat |
Painting Color |
N/A Munsell 4.0PB5.4/5.5 |
Common Lifting Device |
N/A Eye Bolt (s) |
Common Warranty |
N/A 3 Years from Date of Shipment |
